Abstract:The hot deformation behaviors of Fe–28Mn–10Al–1.5C–0.6V steel at T = 950–1150 °C and = 0.01–10 s −1 were studied using the Gleeble-3500 thermo-mechanical simulator. The constitutive model of Fe–28Mn–10Al–1.5C–0.6V steel was established by an artificial neural network (ANN) based on the experimental flow stress data. The critical conditions of dynamic recrystallization (DRX) of the steel under experimental conditions were studied by using both the Najafizadeh–Jonas work hardening rate model and the Cingara–McQueen rheological stress model. The true stress–true strain curve of the steel was analyzed, the work hardening rate was calculated, and the critical strain model was established. At the same time, the relevant material parameters were calculated by linear regression, and the DRX kinetics model of JMAK was also established. This model then was combined with the finite element software DEFORM-3D to simulate the DRX behavior of the steel during hot deformation. These results indicated that the rheological stress of Fe–28Mn–10Al–1.5C–0.6V steel at low shows higher temperature sensitivity and that high T and low are conducive to the occurrence of DRX. The average relative error of the ANN constitutive model is 2.40%, which has high prediction accuracy. The dynamic recrystallization conditions determined by the above models are reliable and conform to the experimental rules. By verifying the microstructure of the steel after thermal compression, the prediction error of the finite element model to the DRX volume fraction is mostly within 10%. Thus, the model has a good predictive ability and provides an effective tool for predicting plastic deformation and microstructure in industrial production.

Investigation on Metadynamic Recrystallization Behavior in SA508-Ш Steel During Hot Deformation

Static Recrystallization Behavior of SA508-III Steel During Hot Deformation

Investigation of Constitutive Relationship and Dynamic Recrystallization Behavior of 22mnb5 During Hot Deformation

The Study on Kinetics of Metadynamic Recrystallisation of a Nb-V Microalloyed Non-Quenched and Tempered Steel

Numerical Simulation of Microstructure Evolution for SA508-3 Steel During Inhomogeneous Hot Deformation Process

Study of metadynamic recrystallization behaviors in a low alloy steel

The metadynamic recrystallization in the two-stage isothermal compression of 300M steel

Recrystallization of 30cr2ni4mov Ultra-Super-critical Rotor Steel During Hot Deformation. Part Ш: Metadynamic Recrystallization

Metadynamic Recrystallization of Nb–V Microalloyed Steel During Hot Deformation

Microstructure simulation and experiment investigation of dynamic recrystallization for ultra high strength steel during hot forging

Research on hot deformation, dynamic recrystallization and numerical simulation of Fe–28Mn–10Al–1.5C–0.6V steel

Metadynamic Recrystallization Behavior of As-cast 904L Superaustenitic Stainless Steel

Hot deformation behavior and dynamic recrystallization model of 35CrMo steel

Description of Dynamic Recrystallization Behaviors and Grain Evolution Mechanisms during the Hot Forming Process for SAE 5137H Steel

A Physically-Based Constitutive Model for Sa508-Iii Steel: Modeling and Experimental Verification

Constitutive Modeling and Dynamic Recrystallization Mechanisms of an Ultralow-carbon Microalloyed Steel During Hot Compression Tests

The Hot Deformation Behavior and Dynamic Recrystallization Model of 20crmnti Structural Steel

Mathematical Modeling of High-Temperature Constitutive Equations and Hot Processing Maps for As-Cast SA508-3 Steel

Study on Static Recrystallization Behavior of Medium-Carbon Cr-Ni-Mo Alloyed Steel During Hot Deformation

Microstructural Evolution and Kinetic Characteristics During Metadynamic Recrystallization in a Ni-Cr-Mo Alloy

Dynamic Softening Mechanism on Steel of ASME SA508-3 During Hot Working