Abstract:During the multi-stage thermoforming of steel, work hardening and the stress softening processes initiated by its dynamic recovery (DRV) and dynamic recrystallisation (DRX) are mainly considered for predicting the flow stress. However, the stress softening components describing the static recovery (SRV), static recrystallisation (SRX), and metadynamic recrystallisation (MDRX) processes that occur during post-deformation annealing have not been reflected in the majority of the existing plasticity models, leading to poor prediction accuracy. To accurately predict the flow stress generated during multi-stage thermoforming, modification has been proposed to the Sellars-Tegart-Garofalo model to account for the evolution of all possible recrystallisation processes and the resultant softening effects in the present work. An integrated response of the flow stress caused by DRV-initiated softening and work hardening was characterised using the Estrin-Mecking dislocation model. Another softening process occurring during thermoforming was quantified by a modified strain-independent DRX kinetic equation. In order to quantify all softening processes occurring during multi-stage thermoforming, comprehensive relationships between the described dynamic and static processes were discussed, and the softening fraction was introduced as a global internal variable for quantifying softening equations. In addition, variations of these physical parameters with the interruption stress and holding time were discussed, and the dependency of the residual softening fraction on the former DRX process was expressed as a logarithmic function. A unified constitutive model capable of predicting the comprehensive contribution of multiple softening processes and the resultant macro-flow stress was constructed by updating internal variables. The flow stress values predicted by the unified model were consistent with the results of compression experiments involving complex loading and isothermal histories. This study proposes an efficient approach to elucidating the relationship between the flow stress of steels and the softening effect of microstructural evolution.

Dynamic Softening Mechanism on Steel of ASME SA508-3 During Hot Working

Quantitative Analysis of Work Hardening and Dynamic Softening Behavior of low carbon alloy Steel Based on the Flow Stress

Quantification of static softening process and its effects on work hardening characteristics of a typical high strength steel during multi-pass deformation

The Coarsening Effect of Sa508-3 Steel Used As Heavy Forgings Material

Microstructure simulation and experiment investigation of dynamic recrystallization for ultra high strength steel during hot forging

Dynamic Recrystallization Behavior of Microalloyed Forged Steel

A Physically-Based Constitutive Model for Sa508-Iii Steel: Modeling and Experimental Verification

Investigation on Metadynamic Recrystallization Behavior in SA508-Ш Steel During Hot Deformation

Investigation of Constitutive Relationship and Dynamic Recrystallization Behavior of 22mnb5 During Hot Deformation

Constitutive Analysis and Optimization on Hot Working Parameters of As-Cast High Cr Ultra-Super-critical Rotor Steel with Columnar Grains

Quantification of Multiple Softening Processes Occurring During Multi-Stage Thermoforming of High-Strength Steel

Constitutive Modeling and Critical Strain of Dynamic Recrystallization in SA508Gr.4N Steel for Advanced Pressure Vessel Materials

Numerical Simulation of Microstructure Evolution for SA508-3 Steel During Inhomogeneous Hot Deformation Process

Competition Between Work-Hardening Effect and Dynamic-Softening Behavior for Processing As-Cast Gh4720li Superalloys with Original Dendrite Microstructure During Moderate-Speed Hot Compression

Multi-scale simulation for the forming of a heavy vessel head considering the evolution of defects and microstructure

Coupled Thermo-Mechanical Analysis of the High-Speed Hot-Forging Process

Mathematical Modeling of High-Temperature Constitutive Equations and Hot Processing Maps for As-Cast SA508-3 Steel

Microstructural modeling and numerical simulation of multi-physical fields for martensitic stainless steel during hot forging process of turbine blade

Hot Deformation Behavior and Processing Map of SA508GR.3 Steel

Hot Workability Characteristics of Low-Density Fe–4Al–1Ni Ferritic Steel

The dynamic compressive behavior and constitutive model of SA508-3 steel at high strain rates under elevated temperatures