Abstract:The catalysts were prepared to study the effect of calcination temperature on the structure and performance of 10% Mn/Al2O3-TiO2 catalyst in the catalytic oxidation of NO using the sol-gel method and impregnation method. The catalysts were characterized by using TPO, XRD, O-2-TPD, Raman and XPS. The TPO results show that the performance of catalyst shows a trend of incline and then decline as calcination temperature increases and the performance of 10% Mn/Al2O3-TiO2 (550 degrees C) is the best. The results of XPS indicate that the content of Mn3+ gradually increases with the exaltation of calcination temperature (450 similar to 550 degrees C) and the performance of corresponding catalyst gradually enhances. At the same time, the content of lattice oxygen decreases, while chemisorption oxygen on the surface of catalyst increases from 40.9% to 64.8%. Raman analysis show that there are in rich of Mn2O3 on the surface of catalyst when the calcination temperature is 550 degrees C. And O-2-TPD analysis also show that the lattice oxygen flows to chemisorption oxygen to improve the content of chemisorption oxygen species with the exaltation of calcination temperature. These results suggest that Mn2O3 may be the main Mn species and releasing more surface chemisorption oxygen will help to promote the catalytic oxidation of NO.

Active Manganese Oxide on MnOx–CeO2 Catalysts for Low-Temperature NO Oxidation: Characterization and Kinetics Study

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

Co-Precipitated Mn0.15Ce0.85O2−δ Catalysts for NO Oxidation: Manganese Precursors and Mn-Ce Interactions

Investigation of the active sites for NO oxidation reactions over MnOx–CeO2 catalysts

Effect of Calcination Temperature on the Structure and Performance of Mn/Al2O3-TiO2 Catalyst in the Catalytic Oxidation of NO

Mesoporous MnCeOx Solid Solutions for Low Temperature and Selective Oxidation of Hydrocarbons.

Mn‐Fe‐Ce Coating Onto Cordierite Monoliths As Structured Catalysts for NO Catalytic Oxidation

Tailoring tunnel-type potassium-free manganese oxide catalyst via cerium substitution for catalytic NO reduction with NH3 at ultra-low temperatures

Enhanced low-temperature NO oxidation by iron-modified MnO2 catalysts

Asymmetric oxygen vacancy-enriched Mn2O3@CeO2 for NO oxidation with excellent low-temperature activity and boosted SO2-resistance

Effect of MnO(x) Modification on the Activity and Adsorption of CuO/Ce(0.67)Zr(0.33)O(2) Catalyst for NO Reduction.

Low-temperature scr of no with nh3 on Mn-based catalysts modified with cerium

Manganese Doped CeO2–WO3 Catalysts for the Selective Catalytic Reduction of NO with NH3: an Experimental and Theoretical Study

Evaluation of MnO phase effects in MnO@CeO2 on the low temperature NO catalytic reduction performance with NH3

Influence of the TiO2 Crystalline Phase of MnOx/TiO2 Catalysts for NO Oxidation

Mechanism and Kinetics Study on Low-Temperature NH3-SCR over Manganese–Cerium Composite Oxide Catalysts

Co Oxidation Activity and Tpr Characterization of Ceo2-Supported Manganese Oxide Catalysts

Investigation and Characterization on MnO_x/TiO_2 for Low-Temperature Selective Catalytic Reduction of NO_x with NH_3

Reaction and Characterization of Low-Temperature Effect of Transition Nanostructure Metal Codoped SCR Catalyst

Low-temperature selective catalytic reduction of NO with NH3 over Mn–Ce–Ox/TiO2: a comparison between catalyst preparation methods

Catalytic Oxidation Of No By O-2 Over Ceo2-Mnox: So2 Poisoning Mechanism