Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. Compared with conventional displacement modal analysis, the strain modal analysis has remarkable advantages in structural damage detection. Identifying the operational strain modal parameters directly from only dynamic strain time–history response measurements of a structure under operational conditions is a challenging issue. In this paper, the strain power spectrum density transmissibility (SPSDT)-based approach is presented to identify the operational strain modal parameters. The SPSDT is first defined by selecting a strain response measurement point as a reference. It is then theoretically proved that the defined SPSDT converges to the ratio of strain mode amplitudes at the system poles. Based on this unique property, the SPSDT matrix is constructed by selecting different strain response measurement points as the references. Singular value decomposition (SVD) is implemented in the matrix at the system pole. The first left singular vector is used to estimate strain mode shape. A simulated three-span continuous beam, a simply supported beam model tested in the laboratory and a full-size arch bridge tested in field are employed to verify the applicability and effectiveness of the proposed SPSDT-based operational strain modal identification method. The obtained results are compared with those of other available methods. It is found that a good agreement is achieved. It is demonstrated that the proposed SPSDT-based method is capable of identifying the operational strain modal parameters of a structure where only the dynamic strain time–history responses are measured. The proposed SPSDT-based method does not need white noise assumption under a single load condition.

Analysis of Strain Modals and the Relationship between the Strain Modals and Displacement Modals

A Strain Modal Flexibility Method to Multiple Slight Damage Localization Combined with a Data Fusion Technique

Stochastic Subspace Method for Structural Strain Modal Parameter Identification

Displacement–strain transformation for a variable cross-section beam based on hypergeometric and Meijer-G functions

Experimental strain modal analysis for beam-like structure by using distributed fiber optics and its damage detection

A Novel Operational Strain Modal Identification Method Based on Strain Power Spectrum Density Transmissibility (SPSDT)

Damage Identification Analysis of Bridge Beam with Spaced Supports As Quasi-Periodic Structure

ANALYSIS OF MODAL PROPERTIES OF BEAMS WITH VISCO-ELASTIC SUPPORT JOINTS

Nonlinear vibration analysis of carbon fiber-reinforced composites with frequency-dependence and strain-dependence: Experimental and theoretical studies

Physical Essence and Influence of Model Parameters on Dynamic Response of Rayleigh Damping

Ultrasonic Measurement of Stress Considering Strain Effect

Modal Parameter Discrimination of Structural Mode based on Vibration Test

Measurement of Deformation and Strain Field of Cantilever Beam under Forced Vibration.

A dynamic stiffness-based modal analysis method for a double-beam system with elastic supports

An Analytical Method and Its Extension for Linear Modal Analysis of Beam-Type Systems Carrying Various Substructures

Structural Shape Monitoring Using Strain Sensing for Morphing Structures

Reformulation of elemental modal strain energy method based on strain modes for structural damage detection

Curvature Modal Analysis Forbending Structures

Deflection estimation of beam structures based on the measured strain mode shape

Modal Strain Based Method for Dynamic Design of Plate-Like Structures

Quasi-static testing based structural modal parameter estimation