Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. Compared with conventional displacement modal analysis, the strain modal analysis has remarkable advantages in structural damage detection. Identifying the operational strain modal parameters directly from only dynamic strain time–history response measurements of a structure under operational conditions is a challenging issue. In this paper, the strain power spectrum density transmissibility (SPSDT)-based approach is presented to identify the operational strain modal parameters. The SPSDT is first defined by selecting a strain response measurement point as a reference. It is then theoretically proved that the defined SPSDT converges to the ratio of strain mode amplitudes at the system poles. Based on this unique property, the SPSDT matrix is constructed by selecting different strain response measurement points as the references. Singular value decomposition (SVD) is implemented in the matrix at the system pole. The first left singular vector is used to estimate strain mode shape. A simulated three-span continuous beam, a simply supported beam model tested in the laboratory and a full-size arch bridge tested in field are employed to verify the applicability and effectiveness of the proposed SPSDT-based operational strain modal identification method. The obtained results are compared with those of other available methods. It is found that a good agreement is achieved. It is demonstrated that the proposed SPSDT-based method is capable of identifying the operational strain modal parameters of a structure where only the dynamic strain time–history responses are measured. The proposed SPSDT-based method does not need white noise assumption under a single load condition.

Stochastic Subspace Method for Structural Strain Modal Parameter Identification

Strain Modal Parameter Identification for Bridge Structures Based on Stochastic Subspace and Stabilization Diagram Methods

Modal Parameter Identification of Structures Using Reconstructed Displacements and Stochastic Subspace Identification

Application of stochastic subspace identification in modal parameter identification of bridge tower

Structural Model Parameters Identification with the Approach of Stochastic Subspace

Study on the method for stochastic subspace identifying structural modal parameters based on two-stage stabilization diagram

Machine Learning-Based Stochastic Subspace Identification Method for Structural Modal Parameters

Subspace System Identification Methods for Structural Modal Parameters

APPLICATION OF STOCHASTIC SUBSPACE METHOD TO EXPERIMENTAL MODAL ANALYSIS OF SUSPENSION BRIDGES

Improved stochastic subspace method for identifying structural modal parameters

Structural Modal Parameter Identification Appling Stochastic Subspace Identification

Improvement in Stochastic Subspace Identification

Modal Parameter Identification Based on Hilbert-Huang Transform and Stochastic Subspace Identification

Uncertain Identification Method of Structural Damage for Beam-Like Structures Based on Strain Modes with Noises.

A Method to Predict Structural Dynamic Strain Based on Acceleration Signal

Experimental Study of Modal Parameter Identification in a Simulated Ambient-Excited Structure

Autonomous Modal Parameter Extraction Based on Stochastic Subspace Identification

Modal parameter identification method for structural health monitoring benchmark model

A Novel Operational Strain Modal Identification Method Based on Strain Power Spectrum Density Transmissibility (SPSDT)

Strain Mode Method for Diagnosis of Local Damage of Structure: Analysis and Application

Identification of modal parameters for bridge wind tunnel test by using a stochastic subspace technique