Abstract:In the past decades, health evaluation and damage detection of large scale structures, especial large bridges, has attracted more and more attention. Among the damage detecting methods based on structural dynamic characteristic test, the strain mode (or the curvature mode) is proved to be much more sensitive than the traditional indexes (such as the natural frequencies and the displacement modes), and is regarded as one of the promising indexes to detect damage. However, up to now the strain mode method is not being widely used on the actual large scale structures yet. The method and instrumentation of dynamic strain measurement on field play as the role of bottle-neck. The method of estimating dynamic strain by two points displacement measurement, proposed in this paper, could be a simple and convenient way to obtain the dynamic strain and even to obtain the strain mode. The key of this method is the precise measurement of the large scale structures' vibration displacement with micron or sub-micron amplitude. Based on a kind of high sensitive low-frequency vibration transducer (DP transducer), the emphasis of this paper was put on the error analysis of this approach while used on field. The errors, including the transducer's placement error, the transducer's compatibility error and the transducer's frequency domain characteristic error, were analyzed. These errors' effects to dynamic strain measurement precision and the processing means of these errors were investigated too. The error analysis and processing illuminated that there is no very rigorous requirement to the placement of the transducers on structures, and the optimization of the transducer's characteristic is the sticking point of improving the testing precision of dynamic strain. Moreover, the appropriate signal processing could also reduce the effects of the errors and reckon the original dynamic strain. The analysis results provided some useful advices for the dynamic strain measurement on the actual large scale structures by the approach of two points displacement measurements.

New Approach for Strain Modal Measurement and Damage Detection of Bridges

Vibration-Based Damage Detection Of Cable-Stayed Bridges

A Novel Mode Sharp-Based Damage Detection Method of Large-Span Bridges

Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method

Approach of speculating the dynamic strain by measuring displacement

Dynamic strain measurement of large scale structures

Damage Identification Analysis of Bridge Beam with Spaced Supports As Quasi-Periodic Structure

A Strain Modal Flexibility Method to Multiple Slight Damage Localization Combined with a Data Fusion Technique

Review of Vibration-Based Damage Detection and Condition Assessment of Bridge Structures Using Structural Health Monitoring

Damage Identification Method for Medium- and Small-Span Bridges Based on Macro-Strain Data under Vehicle-Bridge Coupling

Error Analysis Of Dynamic Strain Measurement For Damage Assessment Of Large Scale Structures

Mode Shape Identification and Damage Detection of Bridge by Movable Sensory System

Strain-Based Structural Condition Assessment of an Instrumented Arch Bridge Using Fbg Monitoring Data

Damage Identification Of The Multi-Box Girder Bridge By Modal Curvature Method

Comparative study on sensitivity of acceleration and strain responses for bridge health monitoring

Interval Uncertainty Identification and Application of Strain Modes in Bridge Structures Based on Monitoring Big Data

Bridge damage identification based on synchronous statistical moment theory of vehicle–bridge interaction

A Hybrid Method for Vibration-Based Bridge Damage Detection

Structural Damage Detection Based on Structural Macro-Strain Mode Shapes Extracted From Non-Stationary Output Responses

A strain sensor based monitoring and damage detection system for a two-span beam bridge