Abstract:In the past decades, health evaluation and damage detection of large scale structures, especial large bridges, has attracted more and more attention. Among the damage detecting methods based on structural dynamic characteristic test, the strain mode (or the curvature mode) is proved to be much more sensitive than the traditional indexes (such as the natural frequencies and the displacement modes), and is regarded as one of the promising indexes to detect damage. However, up to now the strain mode method is not being widely used on the actual large scale structures yet. The method and instrumentation of dynamic strain measurement on field play as the role of bottle-neck. The method of estimating dynamic strain by two points displacement measurement, proposed in this paper, could be a simple and convenient way to obtain the dynamic strain and even to obtain the strain mode. The key of this method is the precise measurement of the large scale structures' vibration displacement with micron or sub-micron amplitude. Based on a kind of high sensitive low-frequency vibration transducer (DP transducer), the emphasis of this paper was put on the error analysis of this approach while used on field. The errors, including the transducer's placement error, the transducer's compatibility error and the transducer's frequency domain characteristic error, were analyzed. These errors' effects to dynamic strain measurement precision and the processing means of these errors were investigated too. The error analysis and processing illuminated that there is no very rigorous requirement to the placement of the transducers on structures, and the optimization of the transducer's characteristic is the sticking point of improving the testing precision of dynamic strain. Moreover, the appropriate signal processing could also reduce the effects of the errors and reckon the original dynamic strain. The analysis results provided some useful advices for the dynamic strain measurement on the actual large scale structures by the approach of two points displacement measurements.

Approach of speculating the dynamic strain by measuring displacement

Dynamic strain measurement of large scale structures

Predicting Structure Dynamic Acceleration Based on Measured Strain

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

A Method to Predict Structural Dynamic Strain Based on Acceleration Signal

New Approach for Strain Modal Measurement and Damage Detection of Bridges

Multi-Point Displacement Monitoring of Bridges Using A Vision-Based Approach

Dynamic displacement estimation and modal analysis of long-span bridges integrating multi-GNSS and acceleration measurements

Real-time strain monitoring and control of urban bridge cluster monitoring system with FBG sensor

Strain-Based Damage-Assessment Method for Bridges under Moving Vehicular Loads Using Long-Gauge Strain Sensing

Novel Measurement Method for Full-field Bridge Strain and Displacement with Limited Long-gauge Strain Sensors

Bridge Damage Detection Method Based on Strain Index

Multi-axis Dynamic Displacement Measurement Based on a Strain Shunt Structure

Error Analysis Of Dynamic Strain Measurement For Damage Assessment Of Large Scale Structures

Bridge displacement estimation by fusing accelerometer and strain gauge measurements

Sensing Mechanism and Real-Time Bridge Displacement Monitoring for a Laboratory Truss Bridge Using Hybrid Data Fusion.

Research on Bridge Spatial Deformation Monitoring Using Light Poles and Displacement-Relay Theory

Strain features and condition assessment of orthotropic steel deck cable-supported bridges subjected to vehicle loads by using dense FBG strain sensors

Bridge Displacement Monitoring Method Based on Laser Projection-Sensing Technology

A strain sensor based monitoring and damage detection system for a two-span beam bridge

Structural Identification and Damage Detection Through Long-Gauge Strain Measurements