Abstract:It is highly desirable to undercool titanium based alloy melts and modulate their dendritic solidification process due to the relevant applications in aerospace engineering. But the serious chemical reactivities of this category of alloys result in potent heterogeneous nucleation and suppress remarkable undercoolings in the course of normal material processing. This paper shows that such a challenge can be solved by containerless processing approach. Liquid Ti-25 wt.%Al alloy is highly undercooled and rapidly solidified under containerless state by both electromagnetic levitation and drop tube techniques. Its metastable undecoolability, crystal nucleation mechanism and dendrite growth process are examined experimentally and analyzed theoretically. Those heterogeneous nuclei with wetting angles above 60 are found to be quite difficult to eliminate even during levitation processing, thus reducing the undercoolability of this alloy. The maximum undercooling of bulk alloy melt reaches 210 K (0.11 TL). The thermodynamic driving force to initiate the nucleation of -Ti phase increases almost linearly with the enhancement of undercooling. The phase dendrite displays a growth velocity up to 11.2 m/s, indicating that the rapid solidification is realized at the relatively slow cooling rate of levitated alloy melt. With the increase of undercooling, phase dendrite experiences a kinetic transition from solute diffusion controlled to thermal diffusion controlled growth. Once undercooling exceeds 100 K, the nonequilibrium solute trapping effect brings about the practically desirable segregationless solidification. Nevertheless, the single condition of substantial undercooling is insufficient to suppress the solid state transformation of phase. It is decomposed into 2-Ti3Al phase plus a small amount of -TiAl compound after containerless solidification at levitated state. A more efficient approach to controlling and modulating the solidification microstructures is to utilize the coupled effects of high undercooling and rapid quenching, which proves to be feasible through the rapid solidification of alloy droplets inside drop tube. For those alloy droplets with diameters ranging from 77 to 1048 m, their cooling rates attain a maximum of 1.05105 K/s, and the predicted maximum undercooling is 227-778 K. In this case, phase dendrites are well refined and kept in a metastable state until ambient temperature. The heat transfer calculations indicate that the thermal radiation is the dominant cooling mechanism for the large alloy droplets above 690 m, whereas thermal convection becomes the major cooling mechanism for the small alloy droplets below 690 m. The microgravity condition during free falling does not show apparent effect on the microstructural formation of these alloy droplets.

Dendrite Growth Kinetics Of Beta Zr Phase Within Highly Undercooled Liquid Zr-Si Hypoeutectic Alloys Under Electrostatic Levitation Condition

Thermal and Solute Diffusion During Dendrite Growth of Mg-5wt.%Zn Alloy

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

Effect of non-linear liquidus and solidus in undercooled dendrite growth: A comparative study in Ni-0.7 at.% B and Ni-1 at.% Zr systems

Phase-Field Simulation of Non-Isothermal Dendritic Growth of Binary Alloy

Thermophysical properties and rapid solidification mechanism of liquid Zr 60 Ni 25 Al 15 alloy under electrostatic levitation condition

Dendritic Solidification of Highly Undercooled Dilute Alloys

Growth Velocity-Undercooling Relationship and Structure Refinement Mechanism of Undercooled Ni-Cu Alloys

Evidence for the transition from primary to peritectic phase growth during solidification of undercooled Ni-Zr alloy levitated by electromagnetic field

Numerical Simulation of Dendrite Growth for Binary Alloy During Non-Isothermal Solidification

Concentration and Fluid Flow Effects on Kinetics, Dendrite Remelting and Stress Accumulation Upon Rapid Solidification of Deeply Undercooled Alloys

Thermal and solute diffusion in α-Mg dendrite growth of Mg-5wt.%Zn alloy

Simulation of Primary Dendrite Competitive Growth and Solute Concentration Distribution in Directional Solidification DZ125 Superalloy

Influence of Anisotropy on Dendritic Growth in Binary Alloy with Phase–Field Simulation

Equiaxed dendritic growth in nearly isothermal conditions: A study combining in situ and real-time experiment with large-scale phase-field simulation

Complete solute trapping of rapidly growing nickel dendrites within liquid Ni72Mo28 hypoeutectic alloy

Fast crystal growth in deeply undercooled ZrTi melts

Solidification behavior of undercooled Cu70Ni30 alloy melt

Phase field modeling of dendritic coarsening during isothermal solidification

Synchrotron Tomographic Quantification of the Influence of Zn Concentration on Dendritic Growth in Mg-Zn Alloys

Substantial undercooling and rapid dendrite growth of liquid Ti-Al alloy