Abstract:Molybdenum disulfide (MoS2) is a promising anode material for lithium-ion batteries (LIBs) due to its distinctive graphene-like structure and high specific capacity. However, its commercial application is hindered by the severe volume expansion during lithiation/delithiation and poor conductivity. In this paper, we report a facile one-pot enhanced hydrothermal synthesis strategy to prepare high-performance MoS2/C composite materials. The results indicate that the as-prepared MoS2/C composite is a subspheroidal core–shell structure material, with uniform coating, good particle dispersion, and an average grain size of approximately 80 nm. The morphology of the composite remained unchanged even after annealing at 500 °C for 2 h. The addition of glucose can accelerate the nucleation and growth of MoS2, and higher hydrothermal temperatures can improve the product yield. The addition of PVP has little effect on the yield, but significantly reduces the particle size. The XPS analysis reveals that the MoO3 may be generated as an intermediate product during the hydrothermal process. The electrochemical test results show that the unannealed MoS2/C samples exhibit discharge-specific capacities of 705.2 mAh·g−1 and 625.7 mAh·g−1 after the first cycle and the 100th cycle, respectively, at a current density of 500 mA·g−1, with a capacity retention rate of 88.7%. In contrast, the specific capacity of the MoS2/C specimens after annealing at 500 °C for 2 h shows a tendency to decrease and then slowly increase during the cycles, and the discharge specific capacity is 582.3 mAh·g−1 after the 100th cycle, which is lower than that of the unheated sample. The impedance analysis reveals that the lithium-ion diffusion coefficient of the MoS2/C material without calcination is 2.11 × 10−18 cm·s−2, which is superior to that of the annealed MoS2/C and pristine MoS2 samples. This characteristic is favorable for lithiation/delithiation during the charge/discharge process.

Core–shell MoO2/C Nanospheres Embedded in Bubble Sheet-Like Carbon Film As Lithium Ion Battery Anodes

Metal-organic Frameworks-Derived CoMOF-D@Si@C Core-Shell Structure for High-Performance Lithium-Ion Battery Anode

Core-shell ZnO@C:N Hybrids Derived from MOFs As Long-Cycling Anodes for Lithium Ion Batteries.

In Situ Synthesis of Concentric C@MoS 2 Core–shell Nanospheres As Anode for Lithium Ion Battery

Construction of Hierarchical Hollow MoS2/Carbon Microspheres for Enhanced Lithium Storage Performance

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

Core-shell Structure of Hierarchical Quasi-Hollow MoS2 Microspheres Encapsulated Porous Carbon As Stable Anode for Li-ion Batteries.

MoC Ultrafine Nanoparticles Confined in Porous Graphitic Carbon As Extremely Stable Anode Materials for Lithium- and Sodium-Ion Batteries

Mo2C Nanodots Anchored on N-Doped Porous CNT Microspheres as Electrode for Efficient Li-Ion Storage

MnO@carbon core-shell nanowires as stable high-performance anodes for lithium-ion batteries.

Hierarchical Co2VO4 Yolk-Shell Microspheres Confined by N-doped Carbon Layer As Anode for High-Rate Lithium-Ion Batteries

High Electrochemical Performances of Α-Moo3@mno2 Core-Shell Nanorods As Lithium-Ion Battery Anodes

Necklace-like carbon nanofibers encapsulating MoO2 nanospheres with Mo–C bonding for stable lithium-ion storage

Uniform Yolk-Shell MoS 2 @Carbon Microsphere Anodes for High-Performance Lithium-Ion Batteries.

Few‐Layer MoS2 Nanosheets Encapsulated in N‐Doped Carbon Hollow Spheres As Long‐Life Anode Materials for Lithium‐Ion Batteries

Carbon nanofiber-wrapped core–shell MoO3 nanorod composite material for lithium-ion battery anodes

Single-phase ZnCo2O4 Derived ZnO–CoO Mesoporous Microspheres Encapsulated by Nitrogen-Doped Carbon Shell As Anode for High-Performance Lithium-Ion Batteries

Chemical activation of hollow carbon nanospheres induced self-assembly of metallic 1T phase MoS2 ultrathin nanosheets for electrochemical lithium storage

One-Pot Hydrothermal Synthesis and Electrochemical Performance of Subspheroidal Core–Shell Structure MoS2/C Composite as Anode Material for Lithium-Ion Batteries

Synthesis of Core-Shell TiO2@MoS2 Composites for Lithium-Ion Battery Anodes

MoC/C Nanowires As High-Rate and Long Cyclic Life Anode for Lithium Ion Batteries