Abstract:Molybdenum disulfide (MoS2) is a promising anode material for lithium-ion batteries (LIBs) due to its distinctive graphene-like structure and high specific capacity. However, its commercial application is hindered by the severe volume expansion during lithiation/delithiation and poor conductivity. In this paper, we report a facile one-pot enhanced hydrothermal synthesis strategy to prepare high-performance MoS2/C composite materials. The results indicate that the as-prepared MoS2/C composite is a subspheroidal core–shell structure material, with uniform coating, good particle dispersion, and an average grain size of approximately 80 nm. The morphology of the composite remained unchanged even after annealing at 500 °C for 2 h. The addition of glucose can accelerate the nucleation and growth of MoS2, and higher hydrothermal temperatures can improve the product yield. The addition of PVP has little effect on the yield, but significantly reduces the particle size. The XPS analysis reveals that the MoO3 may be generated as an intermediate product during the hydrothermal process. The electrochemical test results show that the unannealed MoS2/C samples exhibit discharge-specific capacities of 705.2 mAh·g−1 and 625.7 mAh·g−1 after the first cycle and the 100th cycle, respectively, at a current density of 500 mA·g−1, with a capacity retention rate of 88.7%. In contrast, the specific capacity of the MoS2/C specimens after annealing at 500 °C for 2 h shows a tendency to decrease and then slowly increase during the cycles, and the discharge specific capacity is 582.3 mAh·g−1 after the 100th cycle, which is lower than that of the unheated sample. The impedance analysis reveals that the lithium-ion diffusion coefficient of the MoS2/C material without calcination is 2.11 × 10−18 cm·s−2, which is superior to that of the annealed MoS2/C and pristine MoS2 samples. This characteristic is favorable for lithiation/delithiation during the charge/discharge process.

Synthesis of Core-Shell TiO2@MoS2 Composites for Lithium-Ion Battery Anodes

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Core-shell Structure of Hierarchical Quasi-Hollow MoS2 Microspheres Encapsulated Porous Carbon As Stable Anode for Li-ion Batteries.

Core-shell Composite of Hierarchical MoS2 Nanosheets Supported on Graphitized Hollow Carbon Microspheres for High Performance Lithium-Ion Batteries

Synthesis of Co3O4@SnO2@C core-shell nanorods with superior reversible lithium-ion storage

Synergistic effect of tailored 3D/2D Ti3C2Tx/CoS2/C nanostructured composite anode for significantly enhanced Li-ion storage

Assembled Graphene Nanotubes Decorated by Hierarchical MoS2 Structures: Enhanced Lithium Storage and in Situ TEM Lithiation Study

Facile Synthesis of 3D Few-Layered MoS2coated TiO2nanosheet Core–shell Nanostructures for Stable and High-Performance Lithium-Ion Batteries

Simple Synthesis Of A Double-Shell Hollow Structured Mno2@Tio2 Composite As An Anode Material For Lithium Ion Batteries

One-Pot Hydrothermal Synthesis and Electrochemical Performance of Subspheroidal Core–Shell Structure MoS2/C Composite as Anode Material for Lithium-Ion Batteries

Li4Ti5O12–TiO2/MoO2 Nanoclusters-Embedded into Carbon Nanosheets Core/shell Porous Superstructures Boost Lithium Ion Storage

Efficient Lithium-Ion Storage by Hierarchical Core-Shell TiO2 Nanowires Decorated with MoO2 Quantum Dots Encapsulated in Carbon Nanosheets.

Controllable synthesis of core-shell Co@CoO nanocomposites with a superior performance as an anode material for lithium-ion batteries

Double-Enhanced Core-Shell-Shell Sb 2 S 3 /Sb@TiO 2 @C Nanorod Composites for Lithium- and Sodium-Ion Batteries

Encapsulation of TiO2(B) nanowire cores into SnO 2/carbon nanoparticle shells and their high performance in lithium storage

Synthesis of TiC Nanoparticles Anchored on Hollow Carbon Nanospheres for Enhanced Polysulfide Adsorption in Li-S Batteries

Co3O4 nanosheets anchored on C/Cu porous microspheres as high-performance anode materials for lithium-ion battery

Lychee-like TiO2@Fe2O3 Core-Shell Nanostructures with Improved Lithium Storage Properties as Anode Materials for Lithium-Ion Batteries

Hierarchical core/shell titanium dioxide/molybdenum disulfide nanosheets coupled with carbon architecture for superior lithium/sodium ion storage

Core–Sheath Structured MoO 3 @MoS 2 Composite for High-Performance Lithium-Ion Battery Anodes

Epitaxial Growth of Lattice-Mismatched Core-Shell TiO2 @mos2 for Enhanced Lithium-Ion Storage.