Abstract:The reactive extrusion of maleic anhydride grafted polypropylene (PP-g-MAH) with ethylenediamine (EDA) as coupling agent was carried out in a co-rotating twin-screw extruder to produce long chain branched polypropylene (LCBPP). Part of PP-g-MAH was replaced by maleic anhydride grafted high-density polyethylene (HDPE-g-MAH) or linear low-density polyethylene (LLDPE-g-MAH) to obtain hybrid long chain branched (LCB) polymers. Compared with the linear PP, PE and their blends, the LCB polyolefins exhibit excellent dynamic shear and transient extensional rheological characteristics such as increased dynamic modulus, higher low-frequency complex viscosity, significantly enhanced melt strength and strain-hardening behaviors. LCB polymers also have higher tensile strength, tensile modulus, impact strength and lower elongation at break than linear polymer and their blends. Supercritical carbon dioxide (scCO2) was introduced in the reactive extrusion process. With the presence of scCO 2, the motor current of twin extruder was decreased and LCB polyolefins with lower MFR, higher complex viscosity and increased tensile strength and modulus were obtained. This indicates that the application of scCO2 can reduce the viscosity of melt in extruder, enhance the diffusion of reactive species, facilitate the reaction between functional groups, and increase the LCB density. The foaming behavior of both linear and LCB polyolefins were studied. The results show that cellular materials produced from the LCB polyolefins have higher weight reduction, smaller cell size and better mechanical properties than those produced from the linear polymers.

Effect of Supercritical Carbon Dioxide Treatment on Structure and Mechanical Properties of Β-Nucleated Polypropylene Processed at Different Temperatures

Thermodynamic behavior and crystal structure of polypropylene treated with supercritical carbon dioxide

New Insight into the Action of Supercritical Carbon Dioxide for Grafting of Maleic Anhydride Onto Isotactic Polypropylene by Reactive Extrusion

Effect of Supercritical Carbon Dioxide-Assisted Nano-Scale Dispersion of Nucleating Agents on the Crystallization Behavior and Properties of Polypropylene

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Effect of compressed CO2 on the melting behavior and βα-recrystallization of β-form in isotactic polypropylene

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Effect of Foaming Temperature on Cell Structure of Foamed Polypropylene Using Supercritical CO2

Supercritical Carbon Dioxide‐induced Melting Temperature Depression and Crystallization of Syndiotactic Polypropylene

The Formation of Γ‐crystal in Long‐chain Branched Polypropylene under Supercritical Carbon Dioxide

Effects of Nanoparticle Treatment on the Crystallization Behavior and Mechanical Properties of Polypropylene/calcium Carbonate Nanocomposites

Study On Crystallization Behaviour Of Polypropylene Containing Nano-Calcium Carbonate And Organic Nucleating Agents

Effect Of Supercritical Co2 Treatment On The Structure And Properties Of Poly (Ethylene Terephthalate) Fibers

In Situ FT-IR Spectroscopic Study on the Conformational Changes of Isotactic Polypropylene in the Presence of Supercritical CO2

Carbon Dioxide Induced Crystallization for Toughening Polypropylene

Effect of Supercritical Carbon Dioxide on the Crystallization Behavior of Poly(ether Ether Ketone)

Study on Extrusion Foaming of Polypropylene with Supercritical CO2 As Foaming Agent

Effects of Α and Β Nucleating Agent Compounds on Properties of Polypropylene

THE MECHANICAL AND MELTING CRYSTALLIZATION PROPERTIES OF β-FORM POLYPROPYLENE/POE BLENDS

Formation Mechanism and Morphology of Β-Transcrystallinity of Polypropylene Induced by Two-Dimensional Layered Interface

Coeffect of Different Core–shell Particles and Β Nucleating Agent on the Mechanical and Thermal Properties of Polypropylene Random Copolymer Composites