Abstract:Phase change material (PCM) used in buildings can reduce the building energy consumption and indoor temperature fluctuation. A composite PCM has been fabricated by the binary eutectic mixture of tetradecanol (TD) and lauric acid (LA) absorbed into the expanded perlite (EP) using vacuum impregnation method, and its thermal conductivity was promoted by aluminium powder (AP) additive. Besides, the styrene-acrylic emulsion has been mixed with the composite PCM particles to form the protective film, so as to solve the problem of leakage. Thus, a novel PCM panel (PCMP) has been prepared using compression moulding forming method. The thermal property, microstructure characteristic, mechanical property, thermal conductivity, thermal reliability and leakage of the composite PCM have been investigated and analysed. Meanwhile, the thermal performance of the prepared PCMP was tested through PCMPs installed on the inside wall of a cell under outdoor climatic conditions. The composite PCM has a melting temperature of 24.9 °C, a freezing temperature of 25.2 °C, a melting latent heat of 78.2 J/g and a freezing latent heat of 81.3 J/g. The thermal conductivity test exposed that the thermal conductivity has been enhanced with the addition of AP and the latent heat has been decreased, but it still remains in a high level. The leakage test result has proven that liquid PCM leaking has been avoided by the surface film method. The thermal performance experiment has shown the significant function of PCMP about adjusting the indoor temperature and reducing the heats transferring between the wall inside and outside. In view of the thermal performance, mechanical property and thermal reliability results, it can be concluded that the prepared PCMP has a promising building application potential.

Experimental and Numerical Investigations on the Thermal Performance of Building Plane Containing CaCl2·6H2O/expanded Graphite Composite Phase Change Material

A Numerical Study Of Building Integrated With Cacl2 Center Dot 6h(2)O/Expanded Graphite Composite Phase Change Material

Simulative optimization on energy saving performance of phase change panels with different phase transition temperatures

Novel Wall Panels Containing CaCl2·6H2O-Mg(NO3)2·6H2O/expanded Graphite Composites with Different Phase Change Temperatures for Building Energy Savings

A Sodium Acetate Trihydrate-Formamide/expanded Perlite Composite with High Latent Heat and Suitable Phase Change Temperatures for Use in Building Roof

Thermal Performance of CaCl2·6H2O/expanded Perlite Composite Phase Change Boards Embedded in Aluminous Gusset Plates for Building Energy Conservation

Experimental and Numerical Investigation of the Thermal Performance of Phase-Change Module Using Built-in Electrical Heating

A numerical study of building integrated with CaCl2·6H2O/expanded graphite composite phase change material

A Study on a Novel Phase Change Material Panel Based on Tetradecanol/Lauric Acid/Expanded Perlite/Aluminium Powder for Building Heat Storage

A Polymer-Coated Calcium Chloride Hexahydrate/expanded Graphite Composite Phase Change Material with Enhanced Thermal Reliability and Good Applicability

Effect of Expanded Graphite Size on Performances of Modified CaCl2·6H2O Phase Change Material for Cold Energy Storage

Experimental research on the use of phase change materials in perforated brick rooms for cooling storage

Characterization Of Mgcl2 Center Dot 6h(2)O-Based Eutectic/Expanded Perlite Composite Phase Change Material With Low Thermal Conductivity

Numerical Study on Energy-Saving Performance of a New Type of Phase Change Material Room

Characterization of MgCl₂·6H₂O-Based Eutectic/Expanded Perlite Composite Phase Change Material with Low Thermal Conductivity.

Experimental and Numerical Study of the Thermal Performance of a New Type of Phase Change Material Room

Thermal Performance Analysis of Lightweight Phase Change Envelopes

Numerical Study on the Thermal Performance of Building Wall and Roof Incorporating Phase Change Material Panel for Passive Cooling Application

Thermal Performance of Phase Change Material Wallboard with Typical Structure: Artificial Controlled Condition Experimental Investigation

Numerical Thermal Characterization and Performance Metrics of Building Envelopes Containing Phase Change Materials for Energy-Efficient Buildings

Improvement in thermal properties of PCM/Expanded vermiculite/expanded graphite shape stabilized composite PCM for building energy applications