Abstract:Zn-exchanged ZSM-5-Al2O3 (ZA) composite-supported Pt/NiMo (NM) sulfided catalysts were prepared using the conventional kneading method and were tested for dehydrocyclization-cracking of soybean oil. The effects of Zn addition on the activity and selectivity of products were investigated under moderate-pressure conditions of 0.5 and 1.0 MPa H2 in the temperature range of 420-580 °C. At the temperature 500 °C and higher, most of the sample soybean oil was converted at both the pressures of 0.5 and 1.0 MPa. At 1.0 MPa and 500 °C, the effects of Zn addition appeared and increased the yields of aromatics, while the catalyst without Zn produced larger amounts of products with more than C18. Further, at 0.5 MPa and 580 °C, the gas formation was inhibited in comparison to the cases of 1.0 MPa and the effects of the Zn addition also appeared and increased the yields of aromatics, while the catalyst without Zn produced larger amounts of products with more than C18. The Pt/NM/Zn(122)ZA test catalyst produced more than 63% of liquid fuels in the range C5-C18, and the yield of aromatics was 13%, the maximum value in the present study. The following reaction routes were proposed. The structure of triglyceride is converted by hydrocracking to three molecules of aliphatic acids and propane on the surface PtNiMo sulfide on Al2O3 support. The converted aliphatic acids are decomposed through decarboxylation to hydrocarbon fragments, which are further decomposed by cracking on the acid sites of the catalyst, the surface of NiMo sulfide, Al2O3, or ZSM-5. Finally, the formed C3 and C4 olefins are transformed to aromatics through the Diels-Alder reaction on the Zn species of ZnZSM-5. On the other hand, although gases were relatively small in amount, aromatic compounds were formed significantly, suggesting that cyclization might directly occur without conversion to gaseous hydrocarbons to some extent.

SO 4 2− /tio 2 Promotion on HZSM-5 for Catalytic Cracking of Paraffin

Catalytic and deactivated behavior of SAPO-34/ZSM-5 composite molecular sieve synthesized by in-situ two-step method

ZSM–5@KIT–6 encapsulated composite molecular sieves for the catalytic cracking of waste cooking oil model compound to produce light olefins

ZSM-5@MCM-41 core–shell composite with tunable shell thickness for n -heptane catalytic cracking reaction

Hierarchical ZSM-5 zeolite designed by combining desilication and dealumination with related study of n-heptane cracking performance

Synergetic Regulation of the Microstructure and Acidity of HZSM-5/MCM-41 for Efficient Catalytic Cracking of n-Decane

Excellent catalytic performance over hierarchical ZSM-48 zeolite: Cooperative effects of enhanced mesoporosity and highly-accessible acidity

Facile Synthesis of Nanosheet-Stacked Hierarchical ZSM-5 Zeolite for Efficient Catalytic Cracking of n-Octane to Produce Light Olefins

Characterization and application of a Pt/ZSM-5/SSMF catalyst for hydrocracking of paraffin wax

Zeolite domination in coordination between metal and acid sites on an industrial catalyst for tetralin hydrocracking

Synthesis of pillared nanosheet HZSM-5 zeolite films for catalytic cracking of supercritical n-dodecane

Synthesis and Catalytic Cracking Performance of Fe/Ti-ZSM-5 Zeolite from Attapulgite Mineral

Synthesis of ZSM-48 zeolites and their catalytic performance in C4-olefin cracking reactions

Effects of Zn Addition into ZSM-5 Zeolite on Dehydrocyclization-Cracking of Soybean Oil Using Hierarchical Zeolite-Al2O3 Composite-Supported Pt/NiMo Sulfided Catalysts

Synthesis of Nanoscale ZSM-5 Zeolites for the Catalytic Cracking of Oleic Acid into Light Olefins and Aromatics

Catalytic Cracking of Fischer-Tropsch Wax on Different Zeolite Catalysts

Catalytic Performance of ZSM-5 Catalyst Modified by Sodium Hydroxidefor C_4-Olefin Cracking

Preparation of Pt/TiO2/ZSM-5 Catalyst for Catalytic Conversion Ofn-Butane

Preparation of nano ZSM-5 with hydrophobic surfaces and application to catalytic cracking of hydrocarbon fuels

Construction of Ti-containing zeolite with highly enhanced catalytic activity by active species surface implanting strategy

Effect of External Surface Barriers over Hierarchical ZSM-5 Zeolite on N-Heptane Catalytic Cracking