Abstract:The chemical heat sink yielded by the catalytic cracking of supercritical hydrocarbons facilitates the thermal management of hypersonic aircraft. The objective of this study was to alleviate the diffusion restriction of supercritical hydrocarbons in conventional microporous zeolite films. A dual template method involving different n (C22-6-6)/n (TPAOH) values was adopted to prepare pillared nanosheet HZSM-5 zeolite films by using seed assisted secondary growth. Compared with those of the parent nanosheet HZSM-5 zeolite film (ZN) prepared using only C22-6-6 as the structure directing agent (SDA), the zeolite film prepared using n (C22-6-6)/n (TPAOH) of 10/4 (DZN-4) after pillaring exhibited a higher surface area (525 m2 g−1) and mesoporous volume (0.453 cm3 g−1). A larger amount of TPAOH in the synthesized solution (n (C22-6-6)/n (TPAOH) < 10/6) induced the formation of a bulky microporous MFI crystal phase, thereby sacrificing the mesoporous structure. At 550 °C and 4 MPa, the DZN-4 zeolite film yielded the highest n-dodecane conversion rate (76.8%) and TOF value (130.9 s−1), due to the presence of highly accessible Brønsted acid sites and ordered mesoporous structures, leading to a heat sink of 2.99 MJ kg−1, which is 32% higher than that under ZN. Restricted secondary reactions, such as hydride transfer and aromatization, were observed in the presence of highly connected mesopores designed by pillaring, leading to high and low selectivities toward olefins and aromatic compounds, respectively. Amorphous coke was detected on the external mesopore surface of DZN-4, and the adhesive strength was significantly enhanced, resulting in a higher catalytic stability.

Effect of External Surface Barriers over Hierarchical ZSM-5 Zeolite on N-Heptane Catalytic Cracking

Effect of Particle Size of Single-Crystalline Hierarchical ZSM-5 on Its Surface Mass Transfer in N-Heptane Catalytic Cracking

Effect of Hierarchical ZSM-5 Zeolite Crystal Size on Diffusion and Catalytic Performance of N-Heptane Cracking

The Influence of External Acid Strength of Hierarchical ZSM-5 Zeolites on N-Heptane Catalytic Cracking

n-Heptane catalytic cracking on ZSM-5 zeolite nanosheets: Effect of nanosheet thickness

ZSM-5@MCM-41 core–shell composite with tunable shell thickness for n -heptane catalytic cracking reaction

The effect of hierarchical single-crystal ZSM-5 zeolites with different Si/Al ratios on its pore structure and catalytic performance

Facile synthesis of hierarchical porous ZSM-5 zeolite with tunable mesostructure and its application in catalytic cracking of LDPE

Effects of post treatment of HZSM-5 zeolites on catalytic cracking of butene

Hierarchical Mesoporous ZSM-5 Zeolite with Increased External Surface Acid Sites and High Catalytic Performance in O-Xylene Isomerization

Effect of ZSM-5 zeolite porosity on catalytic cracking of n-heptane

Catalytic Cracking of Supercritical N-Dodecane over Meso-Hzsm-5@al-mcm-41 Zeolites

Synthesis and Performance of Pillared HZSM-5 Nanosheet Zeolites for N-Decane Catalytic Cracking to Produce Light Olefins

n-Heptane catalytic cracking on hierarchical ZSM-5 zeolite: The effect of mesopores

Synthesis of pillared nanosheet HZSM-5 zeolite films for catalytic cracking of supercritical n-dodecane

Remarkable Catalytic Activities Of Hydrothermally Synthesized Bilayered Hzsm-5 Coatings With Additional Nonzeolite Pores

Preparation of hierarchical EU-1 zeolite via NH 4 F etching and the catalytic activity in cracking of n-hexane

Steering interface effect of H-ZSM-5 zeolites with tailored surface barriers to improve their catalytic performances

Opening up ZSM-5 Hierarchical Zeolite's Porosity through Sequential Treatments for Improved Low-Density Polyethylene Cracking

HZSM-5 zeolite cross-linked with ultrathin siliceous layer for intensifying catalytic cracking and diffusion of n-butane

Excellent catalytic performance over hierarchical ZSM-48 zeolite: Cooperative effects of enhanced mesoporosity and highly-accessible acidity