Abstract:PbTe and SnTe in their p-type forms have long been considered high-performance thermoelectrics, and both of them largely rely on two valence bands (the first band at L point and the second one along the Σ line) participating in the transport properties. This work focuses on the thermoelectric transport properties inherent to p-type GeTe, a member of the group IV monotellurides that is relatively less studied. Approximately 50 GeTe samples have been synthesized with different carrier concentrations spanning from 1 to 20 × 1020 cm−3, enabling an insightful understanding of the electronic transport and a full carrier concentration optimization for the thermoelectric performance. When all of these three monotellurides (PbTe, SnTe and GeTe) are fully optimized in their p-type forms, GeTe shows the highest thermoelectric figure of merit (zT up to 1.8). This is due to its superior electronic performance, originating from the highly degenerated Σ band at the band edge in the low-temperature rhombohedral phase and the smallest effective masses for both the L and Σ bands in the high-temperature cubic phase. The high thermoelectric performance of GeTe that is induced by its unique electronic structure not only provides a reference substance for understanding existing research on GeTe but also opens new possibilities for the further improvement of the thermoelectric performance of this material. A team has uncovered the electronic reasons why germanium tellurides (GeTe) are superior energy harvesters to their periodic counterparts. Efforts to improve GeTe thermoelectric efficiency focus mostly on reducing heat conductivity inside its phase-changing crystal lattice. Yanzhong Pei from Tongji University in Shanghai, China, and colleagues now show how semiconductor band tuning may also improve this compound. They synthesized over 50 samples of GeTe with a broad range of carrier concentrations. The researchers then compared transport measurements and theoretical band calculations with those for the more common lead and tin telluride thermoelectrics. The GeTe samples with the best conversion efficiency had charge carriers with lower effective masses than usual and access to numerous energy bands — a combination that enables more heat to be converted to electricity compared to lead telluride or tin telluride. This work focuses on the thermoelectric properties inherent to p-type GeTe by tuning the carrier concentration. Compared with PbTe and SnTe, GeTe shows the highest Seebeck coefficient (a) and power factor (b) in the important carrier concentration range of 1–3 × 1020 cm−3. Provided all are fully optimized in carrier concentrations, GeTe shows the highest thermoelectric figure of merit, zT at all temperatures (c). This originates from its highest degeneracy of the first valence band (along Σ line) in the low temperature phase, and the smallest effective masses for both L and Σ bands in the high temperature phase (d).

Electrical Transport and Thermoelectric Properties of PbTe1−xIx Synthesized by High Pressure and High Temperature

High Pressure Synthesis and Electrical Properties of Ag1-x Pb18 SbTe20

Trace bismuth and iodine co-doping enhanced thermoelectric performance of PbTe alloys

High Pressure Synthesis and Electrical Properties of Ag;Pb;SbTe

High Thermoelectric Performance in PbTe Due to Large Nanoscale Ag2Te Precipitates and La Doping

Thermopower enhancement in Pb1|[minus]|xMnxTe alloys and its effect on thermoelectric efficiency

Reevaluation of PbTe1−xIx As High Performance N-Type Thermoelectric Material

High Thermoelectric Efficiency Of N-Type Pbs

Electronic Origin of the High Thermoelectric Performance of Gete among the P-Type Group Iv Monotellurides

Thermopower enhancement in Pb 1− x Mn x Te alloys and its effect on thermoelectric efficiency

High Temperature Thermoelectric Properties of PbTe Prepared by High Pressure Method

Thermoelectric Transport Properties Of Pbte Under Pressure

Thermoelectric properties and thermal stability of Bi-doped PbTe single crystal

Thermoelectric Properties of Rapid Hot Pressed Polycrystalline Ag1−xPb18SbTe20 Synthesized from Doping PbTe Nanocrystals

Thermoelectric properties of nonstoichiometric PbTe prepared by HPHT

The High Thermoelectric Performance of Slightly Sb Doped PbTe Alloys

Enhanced thermoelectric performance of PbTe within the orthorhombic<mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mi>P</mml:mi><mml:mi>n</mml:mi><mml:mi>m</mml:mi><mml:mi>a</mml:mi></mml:mrow></mml:math>phase

High Performance of N-Type (Pbs)(1-X-y)(pbse)(x)(pbte)(y) Thermoelectric Materials

Strained Endotaxial PbS Nanoprecipitates Boosting Ultrahigh Thermoelectric Quality Factor in n-Type PbTe As-Cast Ingots

Avoiding Oxygen Induced Pb Vacancies for High Thermoelectric Performance of N-Type Bi-doped Pb1-xBixTe Compounds

High Thermoelectric Performance of Ge1−xPbxSe0.5Te0.5 Due to (pb, Se) Co-Doping