Abstract:The corrosive water environment has a decisive influence on the durability of a diversion tunnel lining. In this paper, the effects of carbonation on cement-based materials in water-immersion and saturated-humidity environments were studied by increasing the CO2 concentration. The results show that under conditions of water-immersion and saturated humidity, the color of the non-carbonation region is dark, while the carbonation region is gray, and the color boundary is obvious. However, in an atmospheric environment, there is no zone with a dark color and the color boundary is not obvious. In a saturated-humidity environment, the carbonation depth increases over time and changes greatly, and its value is about 16.71 mm at 200 days. While in a water-immersion environment, the carbonation depth varies little with time and the value is only 2.31 mm. The carbonation depths of cement mortar samples in different environments generally follow a linear relationship with the square root of time. The carbonation coefficient in a saturated-humidity environment is more than nine times that in the water-immersion environment. In a water-immersion environment, the carbonation causes a large loss of calcium in cement-based materials, and their Ca/Si ratio obviously decreases. The calcium silicon ratio (Ca/Si) of cement-based materials in a water-immersion environment is 0.11, which is much less than 1.51 in a water-saturated environment and 1.49 in an atmospheric environment. In a saturated-humidity environment, the carbonation only reduces the pH of the pore solution in the carbonation region, and the structural stability of cement-based materials is not degraded. The number of pores of all radii after carbonation in a water-immersion environment exceeds that in a saturated-humidity environment, and the total pore volume and average pore radius in a water-immersion environment are also larger than in a saturated-humidity environment, so the water-immersion environment accelerates the development and expansion of pores. The research results can provide some theoretical and technical support for the design, construction, and safe operation of diversion tunnel linings.

Influence of Carbonation on “maximum Phenomenon” in Surface Layer of Specimens Subjected to Cyclic Drying-Wetting Condition

Effect of Carbonation on Chloride Maximum Phenomena of Concrete Subjected to Cyclic Wetting–Drying Conditions: A Numerical and Experimental Study

Chloride penetration in concrete exposed to cyclic drying-wetting and carbonation

Chloride Ingress Profiles and Binding Capacity of Mortar in Cyclic Drying-Wetting Salt Fog Environments

Chloride Distribution Feature in Surface Layer of Cement Paste under Cyclic Drying-Wetting Condition

Degradation mechanism of cement mortar exposed to combined sulfate–chloride attack under cyclic wetting–drying condition

Interaction Effect of Chloride Attack and Carbonization in Concrete

Influence of Flexural Loading on Chloride Ingress in Concrete Subjected to Cyclic Drying-Wetting Condition

Influence of Carbonation on the Chloride Ingress into Concrete: Theoretical Analysis and Application to Durability Design

Chloride transport resistance of alkali-activated concrete exposed to combined chloride, sulfate and carbonation environment

Meso-scale Mechanical Deterioration of Mortar Due to Sodium Chloride Attack

Chloride Penetrating under Co-Effects of Initial Curing and Exposure Conditions

Impact of Carbonation on the Chloride Diffusivity in Concrete: Experiment, Analysis and Application

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Effect of Carbonation on Release of Bound Chlorides in Chloride-Contaminated Concrete

Influence of Initial Saturation Degree on Chloride Transport in Concrete under Hydraulic Pressure

Chloride Ion Ingress Distribution Within an Alternate Wetting-Drying Marine Environment Area

Co-effects of initial and exposure environments on chloride penetration

Evaluation on effect of carbonation on chloride binding capacity and stability of cement hydration products with multiple testing methods

Chloride Binding Capacity and Its Effect on the Microstructure of Mortar Made with Marine Sand

Experimental Study on Carbonation of Cement-Based Materials in Underground Engineering