Abstract:Organic-inorganic hybrid perovskites have attracted substantial attention due to their outstanding performance in solar energy conversion and optoelectronic applications. However, the poor stability of organic lead halide perovskites (APbX(3), A: organic cations; X: halide anions) hinders their practical application. Compositional engineering, optimizing the concentration of different A and/or X, is one of the most effective ways to enhance the stability of APbX(3). In particular, mixing formamidinium (FA) and methylammonium (MA) cations has been widely investigated. Here, we performed first-principles calculations to systematically investigate the structures and optical properties of FA(1-x)MA(x)PbI(3). We obtained several stable crystal structures of FA(1-x)MA(x)PbI(3) in the cubic phase for different ratios of FA and MA cations. By analyzing the structures of these mixed cation perovskites, we revealed that the lattice parameters decreased linearly with increasing concentration of MA cations, which was consistent with previous experimental results. For APbX(3) perovskites, the Goldschmidt tolerance factor has been shown to be an effective index for predicting the stability. The mixing of organic cations is an effective method for adjusting this factor and thus the stability of these perovskite materials. In this work, the formation energy difference (Delta E) was calculated and our results showed that mixing of FA and MA cations could increase the thermodynamic stability compared to pure FAPbI(3) and MAPbI(3). FA(0.5)MA(0.5)PbI(3) was found to be the most stable of all composites investigated. Furthermore, the band gap decreased with increasing proportion of FA cations, indicating an effective strategy for extending the absorption range of organic-inorganic hybrid perovskites into the infra-red region of the solar spectrum. By analyzing the Pb-I bond lengths for different FA : MA ratios, we showed that the decrease of band gap mainly comes from the increase of the maximum valence band energy. In addition, the effective masses were similar, irrespective of the cation mixture, indicating that the mixing of organic cations does not affect the carrier transport mechanism in this material. Density of states (DOS) analysis revealed that the DOS of valence band edge increased with increasing proportion of FA cations, enhancing transitions between the valence and conduction bands. Finally, detailed analysis of the optical absorption coefficients of all composition was performed; the absorption spectra were blue shifted with increasing MA cation concentration. These results demonstrated the possibility of controlling the optoelectronic properties of organometallic lead halide perovskites by mixing FA and MA cations and hence, further improving the efficiency of perovskite solar cells.

Ion-Exchange-Induced 2D-3D Conversion of Hma(1-X)Fa(X)Pbi(3)Cl Perovskite into A High-Quality Ma(1-X)Fa(X)Pbi(3) Perovskite

Reproducible One-Step Fabrication of Compact MAPbl(3-x)Cl(x) Thin Films Derived from Mixed-Lead-Halide Precursors

Identification and Characterization of a New Intermediate to Obtain High Quality Perovskite Films with Hydrogen Halides As Additives

Realization of a Highly Oriented MAPbBr(3) Perovskite Thin Film Via Ion Exchange for Ultrahigh Color Purity Green Light Emission

Scalable Fabrication of High-Quality Crystalline and Stable FAPbI3 Thin Films by Combining Doctor-Blade Coating and the Cation Exchange Reaction.

The intrinsic properties of FA((1-x))MA(x)PbI(3) perovskite single crystals

Phase Engineering of Perovskite Materials for High-Efficiency Solar Cells: Rapid Conversion of CH3NH3PbI3 to Phase-Pure CH3NH3PbCl3 Via Hydrochloric Acid Vapor Annealing Post-Treatment

A Balanced Cation Exchange Reaction Toward Highly Uniform and Pure Phase FA1−xMAxPbI3 Perovskite Films

A Facile Deposition of Large Grain and Phase Pure Α-Fapbi3 for Perovskite Solar Cells Via a Flash Crystallization

The fabrication of formamidinium lead iodide perovskite thin films via organic cation exchange

High-Performance Formamidinium-Based Perovskite Solar Cells Via Microstructure-Mediated Δ-to-α Phase Transformation

First-Principles Study of Mixed Cation Methylammonium-Formamidinium Hybrid Perovskite

Regulating the crystalline phase of intermediate films enables FA 1− x MA x PbI 3 perovskite solar cells with efficiency over 22%

Spontaneous Low-Temperature Crystallization of Α-Fapbi3 for Highly Efficient Perovskite Solar Cells

Direct In Situ Conversion of Lead Iodide to a Highly Oriented and Crystallized Perovskite Thin Film via Sequential Deposition for 23.48% Efficient and Stable Photovoltaic Devices

Favorable Grain Growth of Thermally Stable Formamidinium-Methylammonium Perovskite Solar Cells by Hydrazine Chloride

Replacing PbI2 by MAPbI(3) to Realize Large Grain Size and Reduced Hysteresis for Highly Efficient Perovskite Solar Cells

CsI Pre-Intercalation in the Inorganic Framework for Efficient and Stable FA 1- x Cs x PbI 3 (Cl) Perovskite Solar Cells.

Mixed-Organic-Cation (FA)x(MA)1-xPbI3 Planar Perovskite Solar Cells with 16.48% Efficiency via a Low-Pressure Vapor-Assisted Solution Process

Homologous post-treatment strategy enabling phase-pure α-FAPbI3 films

Ion-exchange-induced MAPbI3 Thin-Film 3D–2D and 3D–1D Conversions: Unveiling Structural Transformations in Films Via Synergistic and Competitive Approaches