Bleached Extruder Chemi-Mechanical Pulp Fiber-Pla Composites: Comparison Of Mechanical, Thermal, And Rheological Properties With Those Of Wood Flour-Pla Bio-Composites

Zhaozhe Yang,Xinhao Feng,Yongbao Bi,Zhifang Zhou,Jinquan Yue,Min Xu

DOI: https://doi.org/10.1002/app.44241

IF: 3

2016-01-01

Journal of Applied Polymer Science

Abstract:An environmentally friendly bleached extruder chemi-mechanical pulp fiber or wood flour was melt compounded with poly(lactic acid) (PLA) into a biocomposite and hot compression molded. The mechanical, thermal, and rheological properties were determined. The chemical composition, scanning electron microscopy, and Fourier transform infrared spectroscopy results showed that the hemicellulose in the pulp fiber raw material was almost completely removed after the pulp treatment. The mechanical tests indicated that the pulp fiber increased the tensile and flexural moduli and decreased the tensile, flexural, and impact strengths of the biocomposites. However, pulp fiber strongly reinforced the PLA matrix because the mechanical properties of pulp fiber-PLA composites (especially the tensile and flexural strengths) were better than those of wood flour-PLA composites. Differential scanning calorimetry analysis confirmed that both pulp fiber and wood flour accelerated the cold crystallization rate and increased the degree of crystallinity of PLA, and that this effect was greater with 40% pulp fiber. The addition of pulp fiber and wood flour modified the rheological behavior because the composite viscosity increased in the presence of fibers and decreased as the test frequency increased. (C) 2016 Wiley Periodicals, Inc.