Abstract:The critical resolved shear stress (CRSS) and its related plastic deformation of titanium with hexagonal close packed structure are highly anisotropic, leading to low ductility of the material. Understanding the alloying effect on the CRSS is crucial for the improvement of the mechanical properties through rational composition design. Accurate prediction of the CRSS is not straightforward due to the atomic randomness of the alloy. The generalized stacking fault energies (GSFEs) for the basal and prismatic plane <math>〈a〉</math> slips of random α-Ti1−xAlx alloys (<math>0≤x≤0.1875</math>) are calculated by using first-principles methods including exact muffin-tin orbitals (EMTO) and plane-wave psuedopotential (VASP) methods in this work. The random distribution of Al in the alloy is treated by using both coherent potential approximation (CPA) for EMTO and special quasirandom structure (SQS) techniques for VASP. The CRSSs are then evaluated within the frame work of semi-discrete variational Peierls-Nabarro model. The VASP-SQS calculations with atomic relaxation generate reasonably good GSFE and CRSS compared with the EMTO-CPA and VASP-SQS calculations without atomic relaxation. For pure Ti, the unstable stacking fault energy (<math>γusf</math>) and CRSS (<math>τa</math>) for the basal <math>〈a〉</math> slip are higher than those for the prismatic <math>〈a〉</math> slip. With increasing Al concentration x, <math>γusfb</math> for the basal <math>〈a〉</math> slip decreases whereas <math>γusfp</math> for the prismatic <math>〈a〉</math> increases. The CRSSs for the basal <math>〈a〉</math> slip (<math>τab</math>) and the prismatic <math>〈a〉</math> slip (<math>τap</math>) both increase with x while <math>τap</math> increases faster than <math>τab</math> such that <math>τab</math> approaches to <math>τap</math>. The calculated CRSSs explain successfully our recently measured mechanical properties (yield strength, fracture toughness, ultimate strength, and elongation) of the α-Ti1−xAlx alloy against x.

Origin of Reduced Anisotropic Deformation in Hexagonal Close Packed Ti-Al Alloy

Revealing interface-assisted plastic anisotropy <i>via in situ</i> transmission electron microscopy tension of lamellar TiAl

Concentration-Dependent High-Temperature Deformation Mechanism of Hexagonal Close-Packed Ti-Al Alloys

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Improving the Mechanical Processing of Titanium by Hydrogen Doping: A First-Principles Study

Dislocation Density-Based Model for Flow Behavior of a Near-α Titanium Alloy Considering Effects of Initial Lamellar Thickness

The Role of Biaxial Stress Ratio on the Mechanical Behavior and Deformation Mechanisms in HCP Α-Ti

Investigation on Anisotropic Mechanical Behavior of Ti-6Al-4V Alloy Via Schmid Factor and Kernel Average Misorientation Distribution

A strain rate and temperature-dependent crystal plasticity model for hexagonal close-packed (HCP) materials: Application to α -titanium

Methodology for estimating the critical resolved shear stress ratios of α-phase Ti using EBSD-based trace analysis

A quasi in-situ study on the work hardening and softening mechanisms of Ti–33Zr–12Al–6V alloy

Role of intracrystalline hydrogen on the ductility of dilute Ti-based alloys by first-principles calculations

Composition-dependent slip planarity in mechanically-stable face centered cubic complex concentrated alloys and its mechanical effects

Stable strain hardening behavior of Ti-4Al-5Mo-5V-5Cr-1Nb alloy during plastic deformation

Effects of Al on crack propagation in titanium alloys and the governing toughening mechanism

Exceptionally high strain-hardening and ductility due to transformation induced plasticity effect in Ti-rich high-entropy alloys

Investigations on the role of chemical short-range order in the tensile deformation of FCC Co30Fe16.67Ni36.67Ti16.67 high-entropy alloys via Monte Carlo and molecular dynamics hybrid simulations

Plastic deformation mode and α/β slip transfer of Ti–5Al-2.5Cr-0.5Fe-4.5Mo–1Sn–2Zr–3Zn titanium alloy at room temperature

Generalized stacking fault energies and critical resolved shear stresses of random α-Ti-Al alloys from first-principles calculations

Revealing the Local Lattice Strains and Strengthening Mechanisms of Ti Alloys

LOW CYCLE FATIGUE BEHAVIORS AND MICROSTRUCTURES OF Ti–2Al–2.5Zr WITH FINE GRAIN AT RT AND 77 K