Abstract:Hybrid plasma spraying combines plasma spraying of dry coarse powders and liquids (suspensions or solutions) potentially providing high deposition rates and coatings with novel microstructures and amended functionality. Such composites may be potentially interesting also for the thermal barrier coatings (TBCs). In this study, the first experimental TBCs with hybrid ceramic top-coats were deposited by hybrid water-/argon-stabilized plasma (WSP-H) technology. Coarse dry YSZ (yttria-stabilized zirconia: ZrO 2 -Y 2 O 3 ) powder was selected to form the top-coat matrix. Suspensions of YSZ, Al 2 O 3 (alumina), YAG (yttrium aluminum garnet: Y 3 Al 5 O 12 ), or GZO (gadolinium zirconate: Gd 2 Zr 2 O 7 ) were the source of the additional miniature phase. Uniform functionalized coatings with TBC-relevant thickness and microstructure were successfully deposited. Hybrid and reference coatings deposited also with WSP-H torch and with YSZ feedstocks showed comparable thermal diffusivity regardless of the spraying conditions but the addition of Al 2 O 3 and YAG increased it by ~ 65%, whereas GZO decreased it by ~ 20%. Thermal cycling resistance of the coatings was evaluated by thermal cycling fatigue (TCF) test. Hybrid coating with the addition of YSZ miniature phase endured on average 640 TCF cycles, which was 250-300 cycles less than the reference YSZ coatings deposited without liquid feedstocks but still comparable to the currently used YSZ-based industrial TBCs. Coatings with dissimilar chemistry of additional miniature splats showed inferior mean TCF lifetimes: GZO 438 cycles, Al 2 O 3 272 cycles, and YAG 173 cycles, opening space for further coating optimization. All hybrid coatings failed above the bond-coat/top-coat interface. Comparison of coatings before and after the thermal exposure by scanning electron microscopy (SEM) and x-ray diffraction (XRD) revealed possible changes within the coating microstructure, namely sintering (typical for top-coat consisting only of YSZ), conversion of metastable and amorphous phase (top-coats with the addition of Al 2 O 3 and YAG) or interaction between the matrix and secondary phase (top-coat with the addition of GZO).

Effect of long-term heat-treatment at 1150 °C on the microstructure and properties of thermal barrier coatings based on ZrO2–4 mol.% Y2O3–1 mol.% Gd2O3–1 mol.% Yb2O3

Effect of Heat Treatment at 900 °C on Microstructural and Mechanical Properties of Thermal Barrier Coatings

Microstructure and Thermal Properties of the Early-Stage Experimental Thermal Barrier Coatings Deposited by Hybrid Plasma Spraying

Effect of spraying ceramic powder pore structure on thermophysical properties of plasma-sprayed thermal barrier coatings

Effect of sintering temperature on microstructure and properties of thermal barrier coating

Evolution of Porosity in Suspension Thermal Sprayed YSZ Thermal Barrier Coatings through Neutron Scattering and Image Analysis Techniques

Effect of Sc2O3 Doping on YSZ TBCs: Morphologies, Phase Composition, Mechanical Properties, and High-Temperature Oxidation Resistance

Thermal Stability of Plasma-Sprayed Thick Thermal Barrier Coatings Using Triplex ProTM-200 Torch

Deposition Characteristics, Sintering and Cmas Corrosion Resistance, and Mechanical Properties of Thermal Barrier Coatings by Atmospheric Plasma Spraying

Formation Mechanism of an Ultra-Low Thermal Conductivity Thermal Barrier Coating Deposited Using Biomimetic Hierarchical Porous Microspheres

Immunoglobulin Replacement Therapy in Primary Antibody Deficiency Diseases – Maximizing Success

Achieving high anti-sintering performance of plasma-sprayed YSZ thermal barrier coatings through pore structure design

Thermal Conductivity of Multi-Sized Porous Thermal Barrier Coatings at Micro and Nano Scales after Long-Term Service at High Temperatures

Structure and Properties of Thermal Barrier Coating Prepared by Alumina Coated Zirconia Composite Powder

Preparation and sintering behavior of GdYb-YSZ nanostructured thermal barrier coating

High Temperature Thermal Properties of Columnar Yttria Stabilized Zirconia Thermal Barrier Coating Performed by Suspension Plasma Spraying

Physical and mechanical properties of plasma-sprayed thermal barrier coatings at room and high temperatures

Microstructure and Thermophysical Properties of SrZrO3 Thermal Barrier Coating Prepared by Solution Precursor Plasma Spray

Microstructural Characterization and Thermal Barrier Effects of Conventional and Nanostructured Zro2-7wt.%Y2o3 Thermal Barrier Coatings Deposited by Plasma Spraying

Study on Thermal Shock Resistance of Sc2O3 and Y2O3 Co-Stabilized ZrO2 Thermal Barrier Coatings

Internal Diameter Atmospheric-Plasma-Sprayed High-Performance YSZ-Based Thermal Barrier Coatings