Abstract:To reduce carbon emissions associated with substantial concrete usage in construction and achieve the objectives of green and low-carbon construction, this study innovatively develops a low-carbon binary material by adding limestone powder (LP) and silica fume (SF) into the conventional cement-based material, enhancing the comprehensive utility value of LP. The experimental results show that the addition of 15% LP and 5% SF increases the yield stress of the mortar yet substantially reduces the plastic viscosity to 2.84 Nmm·min, representing a 44.5% decrease compared to pure cement slurry. This reduction is conducive to long-distance pumping of the cement-based material. Moreover, the addition of 5% SF compensates for the 18.8% (mid-stage, 28-d) and 15.8% (late-stage, 90-d) strength loss in mortar caused by LP while simultaneously improving the strength of the co-mixed system by 10.4% (mid-stage) and 10.8% (late-stage). In the early-stage measurements of the LP-SF binary cement-based materials, it is observed that while SF slightly increases the hydration heat release, LP suppresses the early hydration heat release. Therefore, the total heat release observed in the 15% LP and 5% SF group after 72 h is only 254 J/g, demonstrating favorable temperature control and crack prevention effects. In addition, X-ray diffraction (XRD) and thermogravimetric/differential thermogravimetric (TG/DTG) phase analysis reveal a notable increase of 53.56% in CH consumption. Besides, the weight loss on ignition of C-S-H crystals increases, indicating that the secondary hydration of LP and the pozzolanic reaction of SF promote the production of C-S-H in the system. Combined with the late-stage strength and water absorption characteristics, it is concluded that the system exhibits good mechanical properties and compactness. This study presents a use of mixed proportion that enables excellent mechanical properties, good pumping performance, and low hydration heat. Moreover, the analysis indicates that the carbon emission of each cubic meter of the as-developed mortar is reduced by approximately 16.7–23.9%, promoting the efficient and clean utilization of LP and SF.

Investigation of Grafted Sulfonated Black Liquor As Wet‐ready Mortar Admixture

The Synergy Effect of Limestone Powder and Mineral Admixtures on the Mechanical Property of Mortar

Amination of Black Liquor and the Application in the Ready-Mixed Wet Mortar

Effect of Modified Lignosulfonates Additive on Properties of Cement Mortar

Investigating the sulfate resistance of mortars with multiple mineral admixtures in ammonium-magnesium sulfate solution

Effects of a Lignin-Based Amphiphilic Polymer GCL1-J on Mortar Structure and Properties

Study on Sulfonated Process of Pulp Black Liquor and the Application As Concrete Water Reducer

Graft Copolymerization of Black Liquor and Sulfonated Acetone Formaldehyde and Research on Concrete Performance

Preparation of Lignin-based Superplasticizer and Its Application in Mortar

Graft Sulfonation Process of Bamboo Pulp Black Liquor Used As Superplasticizer

Preparation of Lignin-Based Superplasticizer by Graft Sulfonation and Investigation of the Dispersive Performance and Mechanism in A Cementitious System

Effect of Mineral Admixtures on Physical, Mechanical, and Microstructural Properties of Flue Gas Desulfurization Gypsum-Based Self-Leveling Mortar

Laboratory Investigation into the Modification of Transport Properties of High-Volume Fly Ash Mortar by Chemical Admixtures

Grafted-sulfonated Bamboo Pulping Liquor: Preparation and Property

Performance of Concrete Made with Superplasticizer from Modified Black Liquor and Polycarboxylate

Effect of fly ash and gypsum on drying shrinkage and mechanical properties of one‐part alkali‐activated slag mortar

Ultrafiltration of Bamboo Pulp Black Liquor Modified by Graft Sulfonation and Water-Reducing Dispersion Performance of Fractions

Study on Performance of Compound-modification Sulfonated Wheat Straw Lignin GSL As Water Reducer

Graft Sulfonation and Water Reducing-Performance Strengthening Effect of Acid Precipitation Lignin

Examining the early-stage performance and mechanical performance of limestone powder-silica fume binary cement-based materials

Effect of Lignosulfonate Superplasticizer and Anion Surfactants on Properties of Cement Mortar