Abstract:In recent years, alkali-activated mortar (AAM) has emerged as a promising alternative to ordinary Portland cement (OPC) due to concerns regarding the environmental impact resulting from cement production, which releases carbon dioxide and degrades the quality of the environment. To address these concerns, researchers have explored the addition of supplementary binder materials to enhance cement properties and mitigate pollution. The effectiveness of these binder materials depends heavily on their chemical composition and fineness. Notably, ground granulated blast furnace slag (GGBS) enhances the strength and durability of the cement. In response to the scarcity of river sand (RS), dredged marine sand (DMS) has gained popularity as a potential substitute within the civil engineering field. Furthermore, the integration of nanomaterials has shown promising improvements in the mechanical and microstructural properties of mortar. Therefore, this study aims to investigate the properties of mortar by incorporating nano silica (NS) within the range of 1% to 7%, varying the molarity from 2 M to 8 M, and substituting RS with DMS. The tests carried out encompass a range of evaluations, including compressive strength, flexural strength, SEM-EDS, XRD, UPV, RCPT, and carbonation analysis, to comprehensively assess the properties of the mortar. The study reveals that the AAM demonstrates optimal performance when 50% of RS is replaced by DMS in the absence of NS. Once this optimal point is determined, further analyses are conducted at this value while varying the concentrations of NS from 1–7%. The experimental results indicate that replacing 50% of RS with DMS and incorporating 6% NS leads to maximum compressive strength (49.2 MPa) and flexural strength (9.36 MPa) in the assessed properties. Furthermore, the incorporation of NS in GGBS-based AAM mixes enhances durability by improving resistance against chloride penetration, reducing water absorption, and minimizing carbonation diffusion. Additionally, the microstructural and mineralogical characterization of GGBS-NS-based AAM specimens demonstrates the formation of C-S-H and C-A-S-H gels as the end products of the reactions.

Methods of improving the workability and mechanical properties of sulfoaluminate cement mortar

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

Microstructure Refinement of Calcium-Sulfate-aluminate and Portland Cement (CSA-PC) Hybrids with Accelerated CO2 Curing (ACC)

Study on the chloride ion binding rate of sulfoaluminate cement mortars containing different mineral admixtures

Study on Early Hydration Mechanism of Double-Liquid Grouting Material Modified by Composite Early Strength Agent

Properties and acceleration mechanism of cement mortar added with low alkaline liquid state setting accelerator

The Performance Analysis of Ordinary Portland Cement-Sulfoaluminate Cement Structural Repair Reinforced Materials Compounded with Metakaolin

Properties evolution of calcium sulfoaluminate cement blended with ground granulated blast furnace slag suffered from sulfate attack

Effects of Sodium Sulfate and Potassium Sulfate on the Properties of Calcium Sulfoaluminate (CSA) Cement Based Grouting Materials

Development of a Novel Double-Sulfate Composite Early Strength Agent to Improve the Hydration Hardening Properties of Portland Cement Paste

Study on the Effect of Three Types of Calcium Sulfate on the Early Hydration and Workability of Self-Compacting Repair Mortar

Effect of Portland Cement versus Sulphoaluminate Cement on the Properties of Blended Lime-Based Mortars Prepared by Carbide Slag

Evaluation of the efflorescence resistance of calcium sulfoaluminate cement mortar: from indoor accelerated testing to outdoor exposure

Preparing sulfoaluminate cement using phosphogypsum as the only calcium oxide source: Effects of fluoride impurities

Investigating the sulfate resistance of mortars with multiple mineral admixtures in ammonium-magnesium sulfate solution

Effect and Mechanism of Superplasticizers on Performance of Ultrafine Sulfoaluminate Cement-Based Grouting Materials

Investigation on the properties of sustainable alkali-activated GGBS mortar with nano silica and dredged marine sand: Mechanical, microstructural and durability aspects

Effect and Mechanism of Superplasticizers on Microstructure and Properties of Ultrafine Sulfoaluminate Cement-Based Grouting Materials

Effects of Aluminum Sulfate and Quicklime/Fluorgypsum Ratio on the Properties of Calcium Sulfoaluminate (CSA) Cement-Based Double Liquid Grouting Materials

A ternary optimization of alkali-activated cement mortars incorporating glass powder, slag and calcium aluminate cement

Investigation of the macro performance, mechanism, and durability of multiscale steel fiber reinforced low-carbon ecological UHPC