Abstract:In this paper, an imaging mode (called the adaptive multiloop mode) of atomic force microscope (AFM) is proposed to substantially increase the speed of tapping mode (TM) imaging while preserving the advantages of TM imaging over contact mode (CM) imaging. Due to its superior image quality and less sample disturbances over CM imaging, particularly for soft materials such as polymers, TM imaging is currently the most widely used imaging technique. The speed of TM imaging, however, is substantially (over an order of magnitude) lower than that of CM imaging, becoming the major bottleneck of this technique. Increasing the speed of TM imaging is challenging as a stable probe tapping on the sample surface must be maintained to preserve the image quality, whereas the probe tapping is rather sensitive to the sample topography variation. As a result, the increase of imaging speed can quickly lead to loss of the probe-sample contact and/or annihilation of the probe tapping, resulting in image distortion and/or sample deformation. The proposed adaptive multiloop mode (AMLM) imaging overcomes these limitations of TM imaging through the following three efforts integrated together: First, it is proposed to account for the variation of the TM deflection when quantifying the sample topography; second, an inner-outer feedback control loop to regulate the TM deflection is added on top of the tapping-feedback control loop to improve the sample topography tracking; and, third, an online iterative feedforward controller is augmented to the whole control system to further enhance the topography tracking, where the next-line sample topography is predicted and utilized to reduce the tracking error. The added feedback regulation of the TM deflection ensures the probe-sample interaction force remains near the minimum for maintaining a stable probe-sample interaction. The proposed AMLM imaging is tested and demonstrated by imaging a poly(tert-butyl acrylate) sample in experiments. The experimental results demonstrate that the image quality achieved by using the proposed AMLM imaging at a scan rate of 25 Hz and over a large-size imaging (50 μm × 25 μm) is at the same level of that obtained using TM imaging at 1 Hz, while the probe-sample interaction force is noticeably reduced from that achieved using TM imaging at 2.5 Hz.

Application of Some Atomic Force Microscopic Imaging Mode in Observation of Polymer Solar Cells

Application of Atomic Force Microscopy in the Field of Polymer Film

Application Progress of Atomic Force Microscope to Polymer Science

Nanoscale Domain Imaging of All-Polymer Organic Solar Cells by Photo-Induced Force Microscopy.

Application of Atomic Force Microscopy (AFM)-based Single-molecule Force Spectroscopy (SMFS) in Polymer Characterization

Observation on Surface and Cross Section of Thin Film Solar Cells Using Atomic Force Microscope

Scanning Probe Microscopy on Polymer Solar Cells

Multi Scan Mode Atomic Force Microscope with Improved Properties and High Applicability

Advances in the use of Atomic Force Microscopy as a Diagnostic tool for Solar Cells Characterization: From Material Design to Device Applications

In-situ real-time observation of photo-induced nanoscale azo-polymer motions using high-speed atomic force microscopy combined with an inverted optical microscope

High-speed atomic force microscope imaging: adaptive multiloop mode.

Understanding tapping-mode atomic force microscopy data on the surface of soft block copolymers

Impact of Surface Roughness in Measuring Optoelectronic Characteristics of Thin-Film Solar Cells

Recent Progress and Applications of NanoIR‐AFM in Morphological Characterization of Organic Solar Cells

Force Modulation Mode Harmonic Atomic Force Microscopy for Enhanced Image Resolution of Cell

Study of Tip-Sample Contact Process and Phase Contrast in Tapping Mode Atomic Force Microscopy

Low Voltage Scanning Electron Microscopy and Atomic Force Microscopy: State-of-the-art Microscopy Techniques for Investigations of Polymer Single Crystals

Study on Effects of Scan Parameters on the Image Quality and Tip Wear in Afm Tapping Mode

Atomic Force Microscope Study of Ag-Conduct Polymer Hybrid Films: Evidence for Light-Induced Charge Separation

Morphology Measurements by AFM Tapping Without Causing Surface Damage: A Phase Shift Characterization.

Characterization of nanoscale morphology and mechanical properties of conjugated polymer thin films dynamically exposed to a secondary solvent