Abstract:In-plane uniaxial tension of AZ31 magnesium alloy sheet with non-basal texture has been conducted in order to demonstrate the effects of loading direction on the microstructure evolution and mechanical properties at ambient temperature. Loading axes are chosen to be along five directions distributed between rolling direction (RD) and transverse direction (TD), allowing various activities in involved slip and twinning modes to take place. As for twinning modes, electron backscattered diffraction observations confirm that the contribution of \({{\{ 10\overline{1}1\} }}\) compression twinning is minimal to the plastic deformation of all deformed samples. By comparison, \({{\{ 10\overline{1}2\} }}\) extension twinning (ET) not only serves as an important carrier on sustaining and accommodating plastic strain but also contributes to the emergence of TD-component texture with the progression of plastic strain. In terms of slip modes, analysis on Schmid factor demonstrates that the increasing tilted angle between loading direction and RD of sheet is unfavorable to the activation of basal <a> slip, whereas it contributes to the activation of prismatic <a> slip. These observations consequently explain the increasing tendency of 0.2% proof yield stress. Moreover, the activations of basal <a> slip and \({{\{ 10\overline{1}2\} }}\) ET collectively contribute to the concentration of two tilted basal poles toward normal direction. With increasing angle between loading direction and RD, the activations of basal <a> slip and \({{\{ 10\overline{1}2\} }}\) ET are gradually weakened. This leads to a weakening tendency about concentration of two tilted basal poles, a generally increasing tendency about Lankford value (r-value) and a generally decreasing tendency about strain-hardening exponent (n-value).

Tension–compression Asymmetry in Yield Strength and Hardening Behaviour of As-Extruded AZ31 Alloy

Research on deformation mechanism of AZ31 magnesium alloy during uniaxial compression

Tensile and Compressive Deformation Behaviors of Commercially Pure Al Processed by Equal-Channel Angular Pressing with Different Dies

Influence of precipitation on tension and compression twinning in Mg-6.5Zn alloy

Tension—compression asymmetry and corresponding deformation mechanism in ZA21 magnesium bars with bimodal structure

Improving the tension-compression asymmetry of ZK61 magnesium alloy through texture optimization in combined extrusion

Mechanical Properties and Constitutive Analysis of Extruded AZ31B Magnesium Alloy

Effects of texture and twinning on the torsional behavior of magnesium alloy solid rod: A crystal plasticity approach in comparison with uniaxial tension/compression

Microtexture Evolution Via Deformation Twinning and Slip During Compression of Magnesium Alloy AZ31

Mechanism of Plastic Deformation of As-Extruded AZ31 Mg Alloy during Uniaxial Compression

Mg-3Al-1Zn alloy deformed along different strain paths: Role of latent hardening

A quantitative study on mechanical behavior of Mg alloys with bimodal texture components

Tension-Compression Asymmetry in Ultrafine-grained Commercially Pure Ti Processed by ECAP

Effects of extrusion ratio and subsequent heat treatment on the tension-compression yield asymmetry of Mg-4.58Zn-2.6Gd-0.18Zr alloys

Effect of Tension Temperature on the Anisotropy of Tensile Behavior for Az31 Alloys: A Visco-Plastic Self-Consistent Analysis

Effect of texture types on microstructure evolution and mechanical properties of AZ31 magnesium alloy undergoing uniaxial tension deformation at room temperature

Influence of Local Strain on Twinning Behavior During Compression of AZ31 Magnesium Alloy

Effect of Temperature on Microstructure and Texture During Compression of Az31

Study of Twin Behavior During Uniaxial Compression of Az31 Magnesium Alloy

Study on twinning behaviors during multi-directional compression for AZ31 magnesium alloy by EBSD

Dependence of Microstructure Evolution and Mechanical Properties on Loading Direction for AZ31 Magnesium Alloy Sheet with Non-basal Texture During In-Plane Uniaxial Tension