Abstract:In this article, we have proposed and experimentally demonstrated an optical fiber refractive index (RI) sensing interrogation system realized by extrinsic Fabry-Perot interferometer (EFPI) structure-based microwave photonic filter (MPF) technology. EFPI is considered as a sensing element, as well as a spectrum slicer of the MPF. The shift of the central frequency of the MPF's passband caused by the change of the RI in the Fabry-Perot (FP) cavity can be monitored to demodulate the RI variation. In our experiment, four EFPI sensors with different FP cavity lengths have been applied for the RI sensing test. The experimental results show that the sensitivity can be tailored by adjusting the length of the FP cavity, and the longer the length of the FP cavity, the higher the sensitivity can be achieved. When the length of the FP cavity is 960 mu m, a high sensitivity of 1.2 GHz/RIU has been obtained. The proposed sensing system can transfer the changes of the interference pattern in the optical domain to the central frequency shift of the MPF's passband in the electronic domain and thus avoid the limitation of measurement range induced by the periodic characteristics of the FP interference spectrum. The proposed sensing system also has the advantages of high sensitivity, the feasibility of multiplexing, temperature insensitivity, good repeatability and stability, simple fabrication, low cost, and so on.

Temperature-insensitive Refractive Index Sensor Based on an Optical Fiber Extrinsic Fabry–Perot Interferometer Processed by a Femtosecond Laser

An Open-Cavity Fiber Fabry-Perot Interferometer Fabricated by Femtosecond Laser Micromachining for Refractive Index Sensing

Highly Sensitive Refractive Index Optical Fiber Sensors Fabricated by a Femtosecond Laser

A Miniature Fiber-Optic Refractive-Index Sensor Based on Laser-Machined Fabry-Perot Interferometer Tip

Fiber Optic Sensor for Simultaneous Measurement of Refractive Index and Temperature Based on Internal-and- External-Cavity Fabry–Pérot Interferometer Configuration

In-Line Fiber Fabry-Perot Refractive-Index Tip Sensor Based on Endlessly Photonic Crystal Fiber

Temperature-Insensitive Fiber-Optic Refractive Index Sensing System with High Sensitivity by Using EFPI Based Microwave Photonic Filter

Refractive index measurement using photonic crystal fiber-based Fabry-Perot interferometer.

Temperature-insensitive Fiber-Optic Refractive Index Sensor Based on Cascaded In-Line Interferometer and Microwave Photonics Interrogation System

High-sensitivity Refractive Index and Temperature Sensor Based on Cascaded Dual-Wavelength Fiber Laser and SNHNS Interferometer.

An Interferometric Dual Microfiber Refractive Index Sensor via Tapering of Femtosecond Laser Perforated Optical Fiber

In-line fiber-optic Fabry-Perot refractive-index tip sensors

High Resolution Refractive Index Sensing with Dual-Wavelength Fiber Laser

Sensitive refractive index sensor based on an assembly-free fiber multi-mode interferometer fabricated by femtosecond laser

Refractive Index Sensor Based on a Microhole in Single-Mode Fiber Created by the Use of Femtosecond Laser Micromachining

Temperature-independent refractive index sensor based on optical fiber Michelson interferometer

Simultaneous measurement of refractive index and temperature using an epoxy resin-based interferometer

Optical Refractive Index Sensor Based on Microfiber Fabry-Perot Interferometer

Simultaneous Measurement of Refractive Index and Temperature with High Sensitivity Based on a Multipath Fiber Mach-Zehnder Interferometer

PCF-based Fabry-Perot refractive-index sensor

Hybrid Fabry-Perot Interferometer for Simultaneous Liquid Refractive Index and Temperature Measurement