Abstract:Abstract This study investigated the macroscopic physical and mechanical properties of Guiyang red clay during surcharge loading, lateral excavation and lateral unloading with axial loading, and clarified the failure mechanism of microstructure before and after shear under different stress paths of CTC , RTC and TC . Consolidated undrained triaxial shear permeability, SEM scanning, XRF fluorescence spectrum analysis and XRD diffraction tests were conducted to simulate the actual engineering conditions. The stress–strain curve, shear strength, pore water pressure variation rule and macroscopic failure mode of soil samples under different stress paths were analysed. In addition, Image Pro Plus 6.0 and PCAS were used to study the relationship between the macro mechanical properties and micro microstructure failure under different stress paths. The stress–strain curves from CTC , RTC and TC in CU tests were different, with the peak values of shear stress under the three stress paths being P -increasing, equal P -path and P -decreasing path. Moreover, the internal friction angle and cohesion of the increasing P path were higher than those of equal P path and decreasing P path, hence, the influence of stress paths on the cohesion is greater than that of internal friction angle. The pore water pressure is strongly dependent on the stress path, and the variation characteristics of pore water pressure are consistent with the change in the law of the stress–strain curve. Under the same confining pressure in the P -increasing path, the shear failure zone runs through the whole soil sample, and the shear failure zone is significant, whereas under the condition of the P -reducing path, the shear failure angle of soil sample is about 65°, 55° and 45°, and in the equal P path, the soil sample is dominated by the confining pressure, with no obvious microcrack on the surface of the soil sample. The difference is that the distribution of pores in the path of increasing P and equal P is directional, and the anisotropy rate is small, while the distribution of pores in soil samples with shear failure and before shear is random and the anisotropy rate is high.

X-ray computed tomography characterization of soil and rock mixture under cyclic triaxial testing: the effects of confining pressure on meso-structural changes

Using X-ray Computed Tomography to Investigate the Effect of Confining Pressure on Meso-Structural Changes and Crack Damage Evolution in Soil and Rock Mixture During Triaxial Deformation

Study on the progressive fracturing in soil and rock mixture under uniaxial compression conditions by CT scanning

3D Digital Analysis of Cracking Behaviors of Rocks through 3D Reconstruction Model under Triaxial Compression

Damage evolution of rock-encased-backfill structure under stepwise cyclic triaxial loading

Meso-damage Cracking Characteristics Analysis for Rock and Soil Aggregate with CT Test

Undrained Cyclic Triaxial Behavior of Saturated Clays under Variable Confining Pressure

Triaxial Tests of Soil–rock Mixtures with Different Rock Block Distributions

Experimental Study on Rock Strength and Deformation Characteristics Under Triaxial Cyclic Loading and Unloading Conditions

Meso and Macroscale Mechanical Behaviors of Soil–rock Mixtures

Effects of Moisture Content on the Cyclic Behavior of Crushed Tuff Aggregates by Large-Scale Tri-Axial Test

Cyclic Deformation Behaviour of Natural K 0 -Consolidated Soft Clay under Different Stress Paths

Influence of the Soil Properties on Meso-Mechanical Behaviors of Soil-rock Mixtures

Effects of cyclic dynamic loading on the mechanical properties of intact rock samples under confining pressure conditions

Strength characteristics of soil rock mixture under equal stress and cyclic loading conditions

Experimental investigation on True Triaxial Deformation and Progressive Damage Behaviour of Sandstone

Experimental study on the mechanical properties of Guiyang red clay considering the meso micro damage mechanism and stress path

An experimental investigation and mechanical modeling of the combined action of confining stress and plastic strain in a rock mass

Experimental study on cracking damage characteristics of a soil and rock mixture by UPV testing

Effect of prior cyclic damage on rock failure exposed to triaxial multistage unloading confining pressure and cyclic loads

Investigations of Damage Characteristics in Rock Material Subjected to the Joint Effect of Cyclic Loading and Impact