Experimental Study on Rock Strength and Deformation Characteristics Under Triaxial Cyclic Loading and Unloading Conditions

Qing-bin Meng,Jiang-Feng Liu,Li Ren,Hai Pu,Yan-long Chen
DOI: https://doi.org/10.1007/s00603-020-02289-8
IF: 6.518
2020-11-11
Rock Mechanics and Rock Engineering
Abstract:The mechanical behavior of rock under cyclic loading is quite complicated compared to monotonic loading or unloading conditions. The triaxial cyclic loading and unloading testing of rock specimens under 6 confining pressures (<i>σ</i><sub>3</sub>) was carried out through the MTS 815 rock mechanics testing system, to explore the strength, deformation, and expansion characteristics of the rock specimens. The stress–strain curves of the rock specimens in the triaxial cyclic loading and unloading testing presented the hysteresis effect. Besides, as <i>σ</i><sub>3</sub> increased, the rock specimen strength increased, while the failure form brittle to ductile. The elasticity modulus (<i>E</i><sub><i>l</i></sub>) increased first and consequently decreased as the cycle index increased, while it increased as <i>σ</i><sub>3</sub> increased. However, the generalized Poisson's ratio (<i>μ</i><sub><i>l</i></sub>) increased as the cycle index increased, whereas it decreased as the <i>σ</i><sub>3</sub> increased. Based on the Mohr–Coulomb strength criterion and plastic shear strain (<i>γ</i><sup><i>p</i></sup>) as the plastic parameter, the subsequent yield plane model of the loaded rock was characterized by generalized cohesion (<i>c´</i>) and generalized internal friction angle (<i>φ´</i>). Ultimately, the evolution rules of <i>c´, φ´</i> and <i>Ψ</i> (dilatancy angle), with <i>σ</i><sub>3</sub> and <i>γ</i><sup><i>p</i></sup> were revealed. Moreover, the post-peak dilatancy angle models with regard to the influence of <i>σ</i><sub>3</sub> and <i>γ</i><sup><i>p</i></sup> on the volume dilatancy of the rock specimen were established, which indicated that <i>Ψ</i> increased first and consequently decreased along with the <i>γ</i><sup><i>p</i></sup> increase, whereas it decreased as the <i>σ</i><sub>3</sub> increased.
geosciences, multidisciplinary,engineering, geological
What problem does this paper attempt to address?
### Problems Addressed by the Paper This paper primarily explores the strength, deformation, and expansion characteristics of rocks under triaxial cyclic loading and unloading conditions. Specifically, the study conducted triaxial cyclic loading and unloading tests on limestone samples under six different confining pressures (σ3) using the MTS 815 rock mechanics testing system. The main objective of the research is to reveal the strength, deformation, and expansion characteristics of rocks under cyclic loading and unloading conditions, and to enhance the experimental and theoretical understanding of the volumetric expansion behavior of loaded rock samples. #### Main Research Content: 1. **Rock Strength and Deformation Characteristics**: The study investigated the stress-strain curves and their hysteresis effects of rock samples under different confining pressure conditions. 2. **Rock Expansion Characteristics**: The research explored the variation patterns and influencing factors of volumetric expansion of rock samples during cyclic loading and unloading. 3. **Post-Peak Mechanical Behavior of Rocks**: The analysis focused on the plastic deformation characteristics of rocks after the peak and their impact on the volumetric expansion of rocks. Through these studies, the authors aim to provide significant theoretical insights and engineering guidance for the analysis of deformation failure mechanisms and stability control in rock engineering.