Abstract:The sustainability of rock engineering is an emerging trend in future development, as society increasingly recognizes the importance of environmental conservation and responsible resource utilization. In this context, the field of rock engineering is undergoing a paradigm shift toward more sustainable practices. A significant aspect of this shift is the investigation of energy evolution laws specific to rocks, which assumes paramount importance in ensuring the sustainable utilization of damaged rock roadways. To investigate the impact of confining pressure and pore pressure on the energy evolution characteristics of rock beyond the peak, post-peak cyclic loading and unloading tests were conducted on sandstone specimens under hydraulic coupling conditions using the MTS815 rock mechanical test system. The study encompassed three sets of confining pressures, namely, 10 MPa, 20 MPa, and 30 MPa. Different levels of pore pressure were applied within each confining pressure group. For the 10 MPa confining pressure, the pore pressure values were set at 2 MPa, 4 MPa, 6 MPa, and 8 MPa. Similarly, for the 20 MPa and 30 MPa confining pressures, the corresponding pore pressure values were 2 MPa, 6 MPa, 10 MPa, 14 MPa, 18 MPa, and 22 MPa. The experimental findings indicate that as the confining pressure increases, both the maximum and residual elastic energy densities of the rock gradually increase. The rise in confining pressure impedes the release of elastic energy. Moreover, with increasing confining pressure, the rate of increase in the maximum dissipated energy density diminishes, highlighting the inhibitory effect of confining pressure on energy dissipation and release within the rock. Pore pressure, on the other hand, disrupts the load-bearing structure of the rock and reduces its energy storage capacity. Under a constant confining pressure, for a fixed number of cycles (axial strain), the total input energy density, elastic energy density, and dissipation energy density exhibit a negative correlation with pore pressure. With an increase in the number of cycles (axial strain), the proportion of elastic energy initially rises but subsequently declines, while the proportion of dissipated energy follows the opposite trend. Furthermore, as the confining pressure increases, the peak proportion of elastic energy also tends to increase. This indicates that higher confining pressures promote energy accumulation after rock failure, enhancing the rock's ability to store elastic energy.

Linear energy storage and dissipation laws and damage evolution characteristics of rock under triaxial cyclic compression with different confining pressures

Energy Evolution Law of Sandstone Material during Post-Peak Cyclic Loading and Unloading under Hydraulic Coupling

Experimental Study on Rock Strength and Deformation Characteristics Under Triaxial Cyclic Loading and Unloading Conditions

Crack Evolution Behavior of Rocks under Confining Pressures and Its Propagation Model Before Peak Stress

Energy Evolution Characteristics of Sandstones During Confining Pressure Cyclic Unloading Conditions

Effects of Acoustic Emission and Energy Evolution of Rock Specimens Under the Uniaxial Cyclic Loading and Unloading Compression

Experimental Investigation on Deformation Characteristics and Permeability Evolution of Rock under Confining Pressure Unloading Conditions

Influence of Complex Stress Path on Energy Characteristics of Sandstones under Triaxial Cyclic Unloading Conditions

Energy Evolution of Rock under Different Stress Paths and Establishment of A Statistical Damage Model

Effects of cyclic loading and unloading rates on the energy evolution of rocks with different lithology

Damage constitutive model and meso-failure characteristics of freeze–thaw rock under triaxial compression

Strength Attenuation Law of Damaged Rock Samples and Its Structure Effect

Deformation Behaviour and Damage Evolution of Carbonaceous Phyllite under Cyclic Triaxial Loading

Characteristics of strain softening of rocks and its damage constitutive model

Theoretical shear damage characterization of intact rock under compressive-shear stress considering energy dissipation

Three-dimensional Discrete Element Simulation on Mechanical Response and Failure Characteristics of Composite Rock under Triaxial Unloading Condition

Experimental investigation on True Triaxial Deformation and Progressive Damage Behaviour of Sandstone

Effects of cyclic dynamic loading on the mechanical properties of intact rock samples under confining pressure conditions

Stress–Energy Mechanism for Rock Failure Evolution Based on Damage Mechanics in Hard Rock

Effects of Fatigue Load Amplitude on the Mechanical and Energy Evolution Characteristics of Stratified Rock Mass under Triaxial Cyclic Loading and Unloading Conditions

Study on multi-scale damage and failure mechanism of rock fracture penetration: experimental and numerical analysis