Abstract:A controlled-strain repeated direction tension (RDT) test is useful for characterizing asphalt mixtures and assessing fatigue cracking accompanied by plastic deformation. The strain curve in a loading cycle of the controlled-strain RDT test is a standard haversine wave with only a tensile portion, whereas the stress curve has a tensile portion and a compressive portion (quasi-compression) because of the viscoelastoplastic nature of the asphalt mixture. Usually the material properties in the tensile stress portion (the tensile properties) are used, while those in the compressive stress portion (the quasi-compressive properties) are neglected. This leads to nonnegligible errors in estimating the dissipated strain energy (DSE) and characterizing the damage (such as cracking and permanent deformation) generated in the material. The objective of this paper is to obtain complete material properties and accurate amounts of dissipation and storage of energy of this test method as the foundation of damage characterization. This paper provides methods to simulate the stress and strain for the tensile and compressive stress portions separately so as to determine the tensile and quasi-compressive properties, respectively. The difference between the tensile and quasi-compressive properties is investigated using statistical analysis. It is found that the tensile properties of an asphalt mixture are different from the quasi-compressive properties due to the crack opening and closure within each loading cycle. The DSE calculated using both the tensile and quasi-compressive properties is larger compared to the traditional method using only the tensile properties, indicating an underestimation of the damage by the traditional method. In addition, the recoverable strain energy (RSE) is investigated to examine the ability of an asphalt mixture to store and recover energy. A new perspective in terms of the integration method is provided to determine the actual amount of the RSE in a loading cycle. DOI: 10.1061/(ASCE)MT.1943-5533.0000586. (C) 2013 American Society of Civil Engineers.

Effects of Moisture Content on the Cyclic Behavior of Crushed Tuff Aggregates by Large-Scale Tri-Axial Test

Experimental Investigation into the Shakedown State of Unsaturated Road Base Aggregate at Various Fine Contents and Matric Suctions

Influence of Matric Suction on the Long-Term Behavior of Fouled Road Base Materials Under Traffic Loading

Experimental research on long-term dynamic characteristics of unsaturated road base and subbase mixtures

Systematical Calibration and Validation of Discrete Element Models for Fiber Reinforced Cement Treated Aggregates

Effect of Different Moisture Content on Mechanical Parameters of Red Clay Under Freeze-Thaw Cycle

Characterization of Asphalt Mixtures Using Controlled-Strain Repeated Direct Tension Test

Effect of Aggregate on Cracking Behaviours of Concrete in Mesoscopic Modeling

Undrained Dynamic Behaviors of Saturated Clays under Compressive Stress Paths Considering Cyclic Confining Pressure

Long Term Cyclic Behavior of Unsaturated Granular Soils

Experimental study on dynamic characteristics of unbound granular materials under cyclic loading with different frequencies

Experimental Study On Particle Breakage Of Carbonate Gravels Under Cyclic Loadings Through Large-Scale Triaxial Tests

Influence of Shear Stress Level on Cyclic Deformation Behaviour of Intact Wenzhou Soft Clay under Traffic Loading

Influence of Grain Gradation on Permanent Strain of Unbound Granular Materials under Low Confining Pressure and High-Cycle Loading

Deformation Characteristics of Overconsolidated Clay Sheared under Constant and Variable Confining Pressure

The Behavior of Cement-Treated Crushed Rock Material Under the Cyclic-Loading Test with Multiple Amplitude of Applied Strain

Undrained Behaviour of Intact Soft Clay under Cyclic Paths That Match Vehicle Loading Conditions

Deformation Characteristics of Saturated Clay in Three-Dimensional Cyclic Stress State

The effects of suction history on the cyclic behavior of unsaturated road base filling materials

Stress–strain Response of Soft Clay to Traffic Loading

STUDY ON STRAIN SOFTENING IN SATURATED SOFT CLAY UNDER CYCLIC LOADING