Abstract:The structural engineering and design of 6FDA/BPDA-based copolyimide membranes at a molecular level are developed to achieve advanced membrane materials with improved CO2 plasticization resistance as well as high gas separation performance. The commercially available diamine monomers with/without various electronegative groups (-CH3, –CF3 and -Cl) have been employed to prepare 6FDA/BPDA-based copolyimides via the one-step method. All of the copolyimides show excellent solubility in the common solvent, film-forming ability and thus mechanical properties. More interestingly, the intermolecular charge transfer complex (CTC) effects is finely tuned as confirmed by the fluorescence emission spectrum. The introducing of polar chloride groups in the copolyimides could significantly strengthen the CTC effects to prevent the intrusion of condensable CO2 and limit polymeric chain movements. Thus, the membrane based on the 2,2′,5,5′-tetrachlorobenzidine (e.g. 6FDA:BPDA-TSN:TCDB (1:1:1:1)) shows the best carbon dioxide (CO2) plasticization resistance and slowest physical aging without sacrificing gas separation performance versus the membrane having weak polar groups. The CO2 plasticization pressure as high as 350 psi has been observed for the 6FDA:BPDA-TSN:TCDB membrane with polar chloride groups. This value is much higher than that of the copolyimide membranes with –CH3 or –CF3 groups ranging from 100 psi to 200 psi. Moreover, this membrane shows a good gas separation performance, e.g. CO2 permeability of 45.7 barrer and CO2/CH4 ideal selectivity of 35.2 surpassing the commercial cellulose acetate and Matrimid. Such structurally defined polymer with good mechanical strength, plasticization resistance and solubility harnesses the full potential of promising gas separation membrane materials for hollow fiber spinning. This work offers structural engineering guidance for the preparation of high-performance polymers with good tolerance to CO2-induced plasticization.

Structural Characterization and Properties of ODPA–ODA Polyetherimide Membranes Modified by Ethylene Glycol

Preparation of High Density Polyethylene/polyethylene- Block -Poly(ethylene Glycol) Copolymer Blend Porous Membranes Via Thermally Induced Phase Separation Process and Their Properties

Porous poly(vinylidene fluoride) membrane modified with hyperbranched poly(amine-ester)

Facile Preparation Of Odpa-Oda Type Polyetherimide-Based Carbon Membranes By Chemical Crosslinking

Preparation and characterization of carbon and carbon/zeolite membranes from ODPA–ODA type polyetherimide

A Cross-Linked Fluorinated Poly (aryl Ether Oxadiazole) S Using a Thermal Cross-Linking for Anion Exchange Membranes

Pyrolysis of Polyimide Membranes from the Same Dianhydride Monomer and Different Diamines to Form Carbon Membranes

Effect of PEG Additives on Properties and Morphologies of Polyetherimide Membranes Prepared by Phase Inversion

Plasma etching assisted fabrication of PDA/PEI modified PVDF membranes for oil/water emulsion separation

Preparation of Organic/Inorganic Membrane by Pdms Low-Temperature Pyrolysis

Synthesis, Characterization and Electrochemical Transport Properties of the Poly(ethyleneglycol)–grafted Poly(vinylidenefluoride) Nanoporous Membranes

Developing Cross-Linked Poly(ethylene Oxide) Membrane by the Novel Reaction System for H2 Purification

Characterization of ODPA-ODA polyimide non-woven membranes prepared by electrospinning

Effect of Tetraacid on the Properties of ODPA/4,4′‒ODA Polyimide Foams

Novel Thermally Cross-Linked Polyimide Membranes for Ethanol Dehydration Via Pervaporation

Gas separation properties of PMDA/ODA polyimide membranes filling with polymeric nanoparticles

Structural engineering on copolyimide membranes for improved gas separation performance

Preparation and Characterization of Carbon Membranes Made from Poly(phthalazinone Ether Sulfone Ketone)

Synthesis, Cross-Linking Modifications of 6FDA-NDA/DABA Polyimide Membranes for Ethanol Dehydration Via Pervaporation

Novel PMDA-ODA Polyimide / Polystyrene Nanocomposite Membranes for Carbon Dioxide Separation

Chemical Cross-Linking Modification of Polyimide/Poly(ether sulfone) Dual-Layer Hollow-Fiber Membranes for Gas Separation