Abstract:The structural engineering and design of 6FDA/BPDA-based copolyimide membranes at a molecular level are developed to achieve advanced membrane materials with improved CO2 plasticization resistance as well as high gas separation performance. The commercially available diamine monomers with/without various electronegative groups (-CH3, –CF3 and -Cl) have been employed to prepare 6FDA/BPDA-based copolyimides via the one-step method. All of the copolyimides show excellent solubility in the common solvent, film-forming ability and thus mechanical properties. More interestingly, the intermolecular charge transfer complex (CTC) effects is finely tuned as confirmed by the fluorescence emission spectrum. The introducing of polar chloride groups in the copolyimides could significantly strengthen the CTC effects to prevent the intrusion of condensable CO2 and limit polymeric chain movements. Thus, the membrane based on the 2,2′,5,5′-tetrachlorobenzidine (e.g. 6FDA:BPDA-TSN:TCDB (1:1:1:1)) shows the best carbon dioxide (CO2) plasticization resistance and slowest physical aging without sacrificing gas separation performance versus the membrane having weak polar groups. The CO2 plasticization pressure as high as 350 psi has been observed for the 6FDA:BPDA-TSN:TCDB membrane with polar chloride groups. This value is much higher than that of the copolyimide membranes with –CH3 or –CF3 groups ranging from 100 psi to 200 psi. Moreover, this membrane shows a good gas separation performance, e.g. CO2 permeability of 45.7 barrer and CO2/CH4 ideal selectivity of 35.2 surpassing the commercial cellulose acetate and Matrimid. Such structurally defined polymer with good mechanical strength, plasticization resistance and solubility harnesses the full potential of promising gas separation membrane materials for hollow fiber spinning. This work offers structural engineering guidance for the preparation of high-performance polymers with good tolerance to CO2-induced plasticization.

Facile Preparation Of Odpa-Oda Type Polyetherimide-Based Carbon Membranes By Chemical Crosslinking

Effectiveness of a Coagulation Step and Polyester Support on Blend Polyvinylchloride Membrane Formation and Performance

A Cross-Linked Fluorinated Poly (aryl Ether Oxadiazole) S Using a Thermal Cross-Linking for Anion Exchange Membranes

Preparation of Free-Standing High Quality Mesoporous Carbon Membranes

Structural engineering on copolyimide membranes for improved gas separation performance

Preparation and Characterization of A Novel Polyimide-Urethane Reverse Osmosis Composite Membrane Material

Preparation and Characterization of PVDF/nonwoven Fabric Flat-Sheet Composite Membranes for Desalination Through Direct Contact Membrane Distillation

In-situ crosslinking of a novel conjugated dialkynyl-based polyimide for high performance carbon molecular sieve membrane

PEG/PPG-PDMS-Adamantane-based Crosslinked Terpolymer Using the ROMP Technique to Prepare a Highly Permeable and CO2-Selective Polymer Membrane

Preparation and Performance Evaluation of an Asymmetric Polyimide Membrane Used in a Novel Solvent Absorption-Membrane Desorption CO 2 Capture

Preparation and Characterization of HEMA-co-VAm/PDA@GO/PSf Membrane with Enhanced CO2 Separation

Preparation and Performance Evaluation of an Asymmetric Polyimide Membrane Used in a Novel Solvent Absorption-Membrane Desorption CO2 Capture

Finely tuning the microporosity in dual thermally crosslinked polyimide membranes for plasticization resistance gas separations

Novel PMDA-ODA Polyimide / Polystyrene Nanocomposite Membranes for Carbon Dioxide Separation

Fabrication, Facilitating Gas Permeability, and Molecular Simulations of Porous Hypercrosslinked Polymers Embedding 6FDA-Based Polyimide Mixed-Matrix Membranes

Carbon Molecular Sieve Membrane Preparation by Economical Coating and Pyrolysis of Porous Polymer Hollow Fibers

Enhanced polyphosphazene membranes for CO2/CH4 separation via molecular design

Direct Thermal Oxidative Cross-Linking in Air Toward Hierarchically Microporous Polymer Membranes for Advanced Molecular Sieving

PEG/PPG-PDMS-Based Cross-Linked Copolymer Membranes Prepared by ROMP and In Situ Membrane Casting for CO2 Separation: An Approach to Endow Rubbery Materials with Properties of Rigid Polymers

Preparation and Separation Performance of PDMS Composite Membranes for CO2 Separation from CO2-DMC System

Improving Anion Exchange Membranes for DMAFCs by Inter-Crosslinking CPPO/BPPO Blends