Abstract:In this paper, the fretting wear behaviour of steel wires working in coal mining technology is studied numerically. In past studies, the fretting process of steel wires was carried out numerically considering that the coefficient of friction (COF) and wear coefficient (WC) are constant parameters. However, it has been noticed experimentally that COF increases up to a certain number of fretting cycles and then becomes constant, i.e. a steady-state stage, depending on the loading conditions. This increase in COF during the fretting process is also known as the running-up stage. The fretting wear model is modified to evaluate the influence of the varying coefficient of friction (VCOF), which is associated with the variable wear coefficient (VWC), so the influence of VWC is also considered. The subroutine UMESHMOTION used to implement the wear law is also modified to study the effect of VCOF and VWC. Therefore, in this study, the numerical results of a three-dimensional finite element (FE) model are compared, with analytical results of contact area and contact stresses, and with experimental results of peak wear depth. After validating the FE model, the wear scar, the increasing wear depth, wear volume, and the decreasing contact stress with increasing fretting cycles are determined numerically considering VCOF and VWC using cycle jump approach. The energy dissipation effect of frictional force and fretting amplitude is also studied for varying interaction properties of fretting wear models. The numerical simulations are performed by considering both elastic and plastic material properties to analyse the influence of varying interaction properties on fretting wear models at the running-up stage. The results indicate that the VWC model exhibits comparable impacts on both the elastic and plastic models. The results also show that the VWC fretting wear model leads to higher wear scar, wear volume, and wear depth values at the running-up stage as well as at the steady state stage, which are close to the experimental data.

Prediction of Electrical Contact Endurance Subject to Micro-Slip Wear Using Friction Energy Dissipation Approach

Electrical contact resistance endurance of AgNi10 alloys under fretting wear: Experiment and numerical prediction

Wear-out Evolution Analysis of Multiple-Bond-wires Power Modules Based on Thermo-Electro-mechanical FEM Simulation

Numerical Study of Coupled Electrical-Thermal-Mechanical-Wear Behavior in Electrical Contacts

A rolling contact fatigue health prediction model based on load interaction and damage energy accumulation

Quantitative Prediction of Wear Failure Based on Dissipative Methodology under Dry Friction

Numerical simulation on the effect of current intensity on electrical contact performance of electrical connectors subject to micro-slip wear

A Peridynamic Frictional Contact Model for Contact Fatigue Crack Initiation and Propagation

Finite element analysis of fretting wear considering variable coefficient of friction

A computationally efficient method for the prediction of fretting wear in practical engineering applications

An adaptive finite element method for coupled fretting wear and fatigue crack propagation simulation

A computer model for sliding friction in lubricated-point contacts

Predictive modelling of fatigue failure in concentrated lubricated contacts

A Debris Layer Evolution-Based Model for Predicting Both Fretting Wear and Fretting Fatigue Lifetime

Modeling adhesive and abrasive wear phenomena in fretting interfaces: A multiphysics approach coupling friction energy, third body and contact oxygenation concepts

Fracture Mechanics Assessment of Stress Concentrations in Incomplete Fretting Contacts

Accumulated crystal plasticity dissipation energy driven continuum damage two-scale model for fretting fatigue initiation life

An engineering approach for the prediction of wear in mixed lubricated contacts

A comparative study of several life prediction models based on the critical plane approach for fretting fatigue crack initiation

Simulation of fretting wear in steel wires under variable coefficient of friction and variable wear coefficient

Effects of Texture Orientation on the Mixed Thermal Elastohydrodynamic Lubrication and Fatigue Life in Point Contacts