Abstract:Here, it is demonstrated that Fe‐foil/Mg3(Sb, Bi)2 interface sintered at 1073 K effectively prevented a significant diffusion and realized the dual purpose of realizing both the material's high performance and low interfacial resistance. Coupled with p‐type Bi2Te3, a high‐performance thermoelectric module is fabricated showing a competitive efficiency of 7.1% at the hot‐side temperature of 523 K. Mg3(Sb, Bi)2‐based materials possess excellent room‐temperature thermoelectric performance, while poor interfacial behaviors occur when connected with metal electrodes due to the strong chemical activity and volatility of Mg element. In this study, a high efficiency of 7.1% under a temperature difference of 230 K is achieved in n‐Mg3(Sb, Bi)2/p‐Bi2Te3 thermoelectric module. When changing the interfacial layer from Fe powder to Fe foil, it effectively prevents a significant diffusion of both Mg and Bi elements from the material matrix to the interfacial layer, resulting in an extremely low contact resistivity ≈3.4 μΩ cm2 that is almost one order lower than of that of Fe powder/Mg3(Sb, Bi)2 junction ≈30 μΩ cm2. Particularly, a thin diffusion layer with a width of ≈2 μm is initially observed in the unannealed Fe foil/Mg3(Sb, Bi)2 junction. Even after thermal aging at 573 K for 28 days, the diffusion‐layer width is basically unchanged and its corresponding contact resistivity maintained as low as ≈5.8 μΩ cm2. Overall, this work provides deep insights into interfacial design and paves the way for high‐performance and sustainable low‐grade waste heat recovery.

Low Contact Resistivity and Interfacial Behavior of P-Type NbFeSb/Mo Thermoelectric Junction.

Low Contact Resistivity and Long-Term Thermal Stability of Nb0.8Ti0.2FeSb/Ti Thermoelectric Junction

Mo-Fe/NbFeSb Thermoelectric Junctions: Anti-Thermal Aging Interface and Low Contact Resistivity

High Thermoelectric Performance of a Sc2Si2Te6 Monolayer at Medium Temperatures: an Ab Initio Study.

Low contact resistivity and excellent thermal stability of p‐type YbMg0.8Zn1.2Sb2/Fe‐Sb junction for thermoelectric applications

Low interfacial resistivity in CoSi<sub> 2</sub>/ZrCoSb thermoelectric junctions

Enhanced Thermoelectric Performance in the N-Type NbFeSb Half-Heusler Compound with Heavy Element Ir Doping

Localized Surface Doping Induced Ultralow Contact Resistance between Metal and (Bi,Sb)2Te3 Thermoelectric Films

Thermoelectric Performance of Sb2Te3-Based Alloys is Improved by Introducing PN Junctions.

Performance Advancements in P-Type TaFeSb-Based Thermoelectric Materials through Composition and Composite Optimizations

Bonding and High-Temperature Reliability of NiFeMo Alloy/n-Type PbTe Joints for Thermoelectric Module Applications

Origin of efficient thermoelectric performance in half-Heusler FeNb_0.8Ti_0.2Sb

Interfacial Design Contributing to High Conversion Efficiency in Mg3(Sb, Bi)2/Bi2Te3 Thermoelectric Module with Superior Stability

Interface Microstructure and Performance of Sb Contacts in Bismuth Telluride-Based Thermoelectric Elements

Optimized thermoelectric properties of flexible p-type Sb2Te3 thin film prepared by a facile thermal diffusion method

Interfacial Reaction Between Nb Foil and N -Type PbTe Thermoelectric Materials During Thermoelectric Contact Fabrication

Enhanced Interfacial Reliability and Mechanical Strength of CoSb3-Based Thermoelectric Joints with Rationally Designed Diffusion Barrier Materials of Ti-Based Alloys

Engineering the Thermoelectric Transport in Half‐Heusler Materials through a Bottom‐Up Nanostructure Synthesis

Half‐Heusler Thermoelectric Module with High Conversion Efficiency and High Power Density

Thermoelectric performance of p-type (Bi,Sb)2Te3 incorporating amorphous Sb2S3 nanospheres

Improved Thermoelectric Performance of N-Type Half-Heusler MCo1-xNixSb (M = Hf, Zr)