Abstract:The paper investigates the characteristics of the laser beam percussion micro-drilling (LBPMD) process in aerospace nickel-based superalloy Hastelloy X using microsecond pulses. The quality of the drilled hole is crucial in laser beam micromachining, and selecting appropriate process parameters significantly impacts the hole's quality. The objective is to achieve predefined hole dimensions with minimal taper angles. Additionally, the study focuses on the alteration of pulse width, which is a combination of laser pulse frequency and duty cycle. Laser power ( P ), duty cycle % ( D ), focal plane position ( FPP ), and laser frequency ( f ) are considered input parameters, while geometric features such as inlet and outlet diameters, hole taper angle, and inlet circularity are examined as process responses. ANOVA is employed to establish significant relationships between process parameters and response variations based on experimental tests. Creating a precise simulation model that accurately accounts for the moving boundary of the target material's receding surface is a crucial and challenging task in formulating the laser heat conduction problem. It is necessary to simultaneously capture the material's dynamic front movement and update the boundary conditions of the laser source. To model the micro-drilled hole with LBPMD, the UMESHMOTION and DFLUX subroutines, along with the arbitrary Lagrangian-Eulerian (ALE) adaptive remesh algorithm in the AbaqusTM software, are utilized. Notably, no previous numerical study has predicted the geometry of micro-drilled holes using this technique. The proposed procedure is validated through the predictions of inlet and outlet hole diameters. Special emphasis is placed on the validation of models. Consequently, the numerical model and statistical model are compared as well as the need to define model applicability. The study demonstrates that all input parameters significantly influence the inlet hole diameter, while the pulse width notably affects the taper angle and circularity. The interaction between high laser frequency and low duty cycle results in reduced pulse duration. Multi-objective optimization is performed to determine the optimal process parameter settings for desired quality characteristics, considering minimum hole taper angle, precise inlet diameter, and maximum inlet circularity of the hole as optimization criteria. The findings show that with the optimized predicted results obtained from the optimal input variables, a composite desirability of 92% can be achieved.

Characterization of Laser Drilling and Parametric Optimization Using Golden Jackal Optimizer

Optimization of heat affected zone in laser cutting of Kevlar-29 fiber composite using hybrid response surface based grey wolf optimization (RSGWO) algorithm

Multi-objective Optimization of Kerf-taper and Surface-roughness Quality Characteristics for Cutting-operation On Coir and Carbon Fibre Reinforced Epoxy Hybrid Polymeric Composites During CO2-Pulsed Laser-cutting Using RSM

Investigation on Polymer Hybrid Composite Through CO2 Laser Machining for Precise Machining Conditions

Artificial Intelligence System Approach for Optimization of Drilling Parameters of Glass-Carbon Fiber/Polymer Composites

Comparative Analysis of Grey Relational Analysis Integrated with the Principal Component Analysis and Analytic Hierarchy Process for Multiobjective Optimization of Inclined Laser Percussion Drilling in Carbon Fiber Reinforced Composites

Dual-Method Characterization and Optimization of Drilling Parameters for Picosecond Laser Drilling Quality in CFRP

Optimization of PC micro-drilling using a continuous CO2 laser: an experimental and theoretical comparative study

Inclined laser drilling in glass fiber reinforced plastic using Nd: YAG laser

Optimizing Process Parameters in Drilling of CFRP Laminates: A Combined MOORA–TOPSIS–VIKOR Approach

Optimization of AWJ parameters for improved material removal and hole geometry in drilling of Glass Fiber/Aluminum mesh epoxy hybrid composites

Simultaneous optimization of process parameters during abrasive water jet machining on glass fibre reinforced polymer

A Comprehensive Study on the Optimization of Drilling Performance in Hybrid Nano-Composites and Neat CFRP Composites Using Statistical and Machine Learning Approaches

A hybrid GRA-PCA-TOPSIS Technique Optimization of EDD Process Parameter on Drilling of AL8011/B4C/aloevera composites

Optimization of Drilling Parameters on Delamination and Burr Formation in Drilling of Neat CFRP and Hybrid CFRP Nano-Composites

Multi‐objective optimization of ultrasonic vibration‐assisted drilling in carbon fiber reinforced polyetherketoneketone laminate

A novel numerical modeling of microsecond laser beam percussion micro-drilling of Hastelloy X: experimental validation and multi-objective optimization

Experimental investigation and optimization of modification during coaxial waterjet-assisted femtosecond laser drilling

Optimizing the Drilling process parameters of AZ91 based hybrid composites using TOPSIS and Grey Relational Analysis

Parametric Optimization in the Laser Cutting of Titanium Alloy Sheet (Grade-II)

Advancements in metaheuristic optimization techniques for laser beam cutting of FRP composites: A review