Abstract:Background: the clinical application of orthopedic or dental implants improves the quality of the lives of patients. However, the long-term use of implants may lead to implant loosening and related complications. The purpose of this study is to deposit titanium (Ti)-niobium (Nb)-zirconium (Zr)-tantalum (Ta) alloys on the surface of Ti-6Al-4V to increase structural strength and biocompatibility for the possible future application of implants. Materials and methods: Ti, Nb, Zr, and Ta served as the materials for the surface modification of the titanium alloy. TiNbZr and TiNbZrTa coatings were produced using cathodic arc evaporation, and a small amount of nitrogen was added to produce TiNbZrTa(N) film. Annealing and oxidation were then conducted to produce TiNbZrTa-O and TiNbZrTa(N)-O coatings. In this study, biological tests and finite element analyses of those five alloy films, as well as uncoated Ti-6Al-4V, were performed. Human osteosarcoma cells (MG-63) and mouse fibroblast cells (L-929) were used to analyze cytotoxicity, cell viability, and cell morphology, and the bone differentiation of MG-63 was evaluated in an alkaline phosphatase experiment. Furthermore, for measuring the gene expression level of L-929, reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR) was conducted. The three-dimensional (3D) computational models of the coated and uncoated sample films were constructed using images of transmission electron microscopy and computer-aided design software and, then, the stress distributions of all models were evaluated by finite element analysis. Result: the cytotoxicity test revealed that the surface treatment had no significant cytotoxic effects on MG-63 and L-929 cells. According to the results of the cell viability of L-929, more cell activity was observed in the surface-treated experimental group than in the control group; for MG-63, the cell viability of the coated samples was similar to that of the uncoated samples. In the cell morphology analysis, both MG-63 and L-929 exhibited attached filopodia and lamellipodia, verifying that the cells were well attached. The alkaline phosphatase experiment demonstrated that the surface treatment did not affect the characteristics of early osteogenic differentiation, whereas RT-qPCR analysis showed that surface treatment can promote better performance of L-929 cells in collagen, type I, α1, and fibronectin 1. Finally, the results of the finite element analysis revealed that the coated TiNb interlayer can effectively reduce the stress concentration inside the layered coatings. Conclusions: TiNbZrTa series films deposited using cathodic arc evaporation had excellent biocompatibility with titanium alloys, particularly in regard to soft tissue cells, which exhibited an active performance. The finite element analysis verified that the TiNb interlayer can reduce the stress concentration inside TiNbZrTa series films, increasing their suitability for application in biomedical implants in the future.

In Vitro and in Vivo Investigations of A-C/a-c:Ti Nanomultilayer Coated Ti6Al4V Alloy As Artificial Femoral Head.

Mechanical Tests, Wear Simulation and Wear Particle Analysis of Carbon-Based Nanomultilayer Coatings on Ti6Al4V Alloys As Hip Prostheses

Mechanical Properties and in Vitro and in Vivo Biocompatibility of A-C/a-c:Ti Nanomultilayer Films on Ti6Al4V Alloy As Medical Implants.

[Five Million Wear Simulation and Particle Analysis of Carbon-Based Nano-Multilayer Coatings Titanium Alloy Femoral Head].

Longer-Term Mechanical And Biological Evaluation Of Titanium Alloy Coated With Apatite Layer

Evaluation of Ti/Al alloy coated with biogenic hydroxyapatite as an implant device in dogs' femur bones

Mechanical and Histological Evaluations of Hydroxyapatite-Coated and Noncoated Ti6al4v Implants in Tibia Bone

In Vivo Testing of Canine Prosthetic Femoral Components with HA-Ti Ladder-Type Coating on Vacuum Plasma-Sprayed Ti Substrate

Nanoscale surface modification by anodic oxidation increased bone ingrowth and reduced fibrous tissue in the porous coating of titanium-alloy femoral hip arthroplasty implants.

3D-printed Ti6Al4V femoral component of knee: Improvements in wear and biological properties by AIP TiN and TiCrN coating

In Vitro Biocompatibility of a Nanocrystalline Β-Ta2o5 Coating for Orthopaedic Implants

Biocompatibility and Microstructure-Based Stress Analyses of TiNbZrTa Composite Films

Histological and biomechanical evaluation in the interface between nano-surface titanium alloy implants and bone

Nanomechanical and Microstructural Characterization of Biocompatible Ti 3 Au Thin Films Grown on Glass and Ti6Al4V Substrates

Biomechanical Studies on Gradient Hydroxyapatite-Coating

The in vitro and in vivo performance of a strontium-containing coating on the low-modulus Ti35Nb2Ta3Zr alloy formed by micro-arc oxidation

Ceramic Coating of a Titanium Alloy Implant Prevents Cartilage Damage Due to Localized Cartilage Defects

Fabrication of dense α-alumina layer on Ti-6Al-4V alloy hybrid for bearing surfaces of artificial hip joint

Improving the Protective Properties of an Artificial Joint Friction Couple by Using TiN and DLC Films

A Graded Nano-Tin Coating on Biomedical Ti Alloy: Low Friction Coefficient, Good Bonding and Biocompatibility.

Comparative analysis of titanium coating on cobalt-chrome alloy in vitro and in vivo direct metal fabrication vs. plasma spraying