Abstract:Aluminum-based alloys have been considered candidate materials for cathodic protection anodes. However, the Al-based alloys can form a layer of alumina, which is a drawback in a sacrificial anode. The anodes must exhibit uniform corrosion to achieve better performance. Aluminum can be alloyed with Zn to improve their performance. In this sense, in the present research, the electrochemical corrosion performance of Al-xZn alloys (x = 1.5, 3.5, and 5 at.% Zn) exposed to 3.5 wt.% NaCl for 24 h was evaluated. Polarization curves, linear polarization resistance (LPR), and electrochemical impedance spectroscopy (EIS) were used to identify the electrochemical behavior. The microstructure of the samples before the corrosion assessment was characterized by means of X-ray diffraction analyses (XRD) and scanning electron microscopy (SEM). In addition, microstructures of the corroded surfaces were characterized using X-ray mappings via SEM. Polarization curves indicated that Zn additions changed the pseudo-passivation behavior from what pure Al exhibited in a uniform dissolution regime. Furthermore, the addition of Zn shifted the corrosion potential to the active side and increased the corrosion rate. This behavior was consistent with the proportional decrease in polarization resistance (Rp) and charge transfer resistance (Rct) in the EIS. The analysis of EIS was done using a mathematical model related to an adsorption electrochemical mechanism. The adsorption of chloride at the Al-Zn alloy surface formed aluminum chloride intermediates, which controlled the rate of the process. The rate constants of the reactions of a proposed chemical mechanism were evaluated.

Corrosion behavior of Sn-3.0Ag-0.5Cu alloy under chlorine-containing thin electrolyte layers

Understanding Corrosion Mechanism of Sn–Zn Alloys in NaCl Solution Via Corrosion Products Characterization

Investigation on the electrochemical evolution of the Cu-sn-Pb ternary alloy covered with CuCl in a simulated atmospheric environment

The Role of Zn Precipitates and Cl− Anions in Pitting Corrosion of Sn–Zn Solder Alloys

Corrosion Mechanism of Zn-30Sn High-Temperature, Lead-Free Solder in Neutral NaCl Solution

Effect of Ag addition on the microstructure and corrosion properties of Sn–9Zn lead-free solder

Electrochemical Behavior of Zn-xSn High-Temperature Solder Alloys in 0.5 M NaCl Solution

Corrosion and passive behavior of AlxCrFeNi3−x (x = 0.6, 0.8, 1.0) eutectic high entropy alloys in chloride environment

Selective Corrosion of Β-Sn and Intermetallic Compounds in an Ag–Sn Alloy at Different Potentials in Nacl and Na2so4 Solutions

Corrosion Behavior of Al Modified with Zn in Chloride Solution

Corrosion Behavior of Pure Zinc and Its Alloy under Thin Electrolyte Layer

Corrosion Resistance of Cu-Ni-Si Alloy Under High-Temperature, High-Pressure H2S and Cl− Environments

Corrosion Behavior of High-performance Crystalline CuCrZr/Amorphous CuZrAl Composites in NaCl Solution

Corrosion Behavior of As-Cladding Al 0.8 CrFeCoNiCu 0.5 Si x High Entropy Alloys in 3.5% NaCl Solution

Effects of Corrosive Media on the Localized Corrosion Forms of Mg-3Zn Alloy

Corrosion Behavior of Lead Alloy Anodes for Copper Electrowinning

Effect of minor Cu addition on corrosion behavior of Sn-Zn-xCu touch-up solder alloys

Study on the structure and corrosion behavior of hot-dipped Zn–6Al–3Mg alloy coating in chlorine-containing environment

The effect of Cl- concentration on the corrosion behavior of electroplated Cu-Ni-W alloy coating

Electrochemical Behavior Of Sn-Xzn Lead-Free Solders In Aerated Nacl Solution

Electrodeposition and characterization of Zn–Sn alloy coatings from a deep eutectic solvent based on choline chloride for corrosion protection