Abstract:This study conducted Detached-Eddy Simulations (DES) of actively controlled flow over a 0.35 m chord NACA0015 airfoil at an incidence angle of 11° and a chord Reynolds number of 1 million. The uncontrolled, natural flow were simulated by using DES-type methods, with a comparison of different underlying RANS models and subgrid-scale stress models in LES mode. Results from these computations were compared with experimental observations, enabling their reliable assessment through the detailed investigation of the Reynolds stresses as well as the separation and reattachment. It was found that among all five DES-type methods, only the Spalart–Allmaras-based Improved Delayed DES (IDDES-SA) captured the separation point as measured in the experiments. The classical vortex-shedding and the shear-layer flapping modes for airfoil flows with shallow separation were also extracted from the IDDES-SA results by using Dynamic Mode Decomposition. With better understanding of unsteady flow features, effective control practices were illustrated. The pulsed blowing actuation was adopted according to the experimental settings. The flow-field around jet orifices was resolved, instead of the use of actuation boundary conditions. It was found that for all actuation frequencies investigated in this article, the saturation of lift-to-drag ratio was yielded already at intermediate momentum coefficients, two-fifths of the actuation amplitude used in the experiment; the optimal actuation frequency was 0.6 among all cases, consistent with the dominant frequency of the baseline flow. The suppression of separation bubble led to a maximum lift-to-drag ratio enhancement of 194%, as well as a sharp decrease of all Reynolds stress components. To further reduce the strong unsteadiness introduced by excitation, a phase shift among jet orifices was applied and evaluated. The pulsed blowing with the jet orifices in an anti-phased manner was found to be very effective to damp the fluctuations of the lift around its mean value, though it led to a small decrease in mean lift.

DDES with Adaptive Coefficient for Stalled Flows Past a Wind Turbine Airfoil

Performance Of A Modified Ddes For The Near Stall Flow Past A Naca0015 Airfoil

Constrained Large-Eddy Simulation for Aerodynamics

Constrained Large-Eddy Simulation and Detached Eddy Simulation of Flow Past a Commercial Aircraft at 14 Degrees Angle of Attack

Numerical Studies of Undulation Control on Dynamic Stall for Reverse Flows

Numerical Studying the Dynamic Stall of Reverse Flow Past a Wing

A Dynamic Delayed Detached-Eddy Simulation Model for Turbulent Flows

Simulations of Transition and Separation Past a Wind-Turbine Airfoil Near Stall

A Comparative Study of DES Type Methods for Mild Flow Separation Prediction on a NACA0015 Airfoil

Improvements for the DDES Model with Consideration of Grid Aspect Ratio and Coherent Vortex Structures

Enhanced Prediction of Three-dimensional Finite Iced Wing Separated Flow Near Stall

Transitional Delayed Detached-Eddy Simulation for a Compressor Cascade: A Critical Assessment

Simulations of Complex Turbulent Flows with RANS-LES Hybrid Approaches

Application of Delayed Detached Eddy Simulation and RANS to Compressor Cascade Flow

Improved Self-Adaptive Turbulence Eddy Simulation for Complex Flows and Stall Prediction Using High-Order Schemes

IDDES Method Based on Differential Reynolds-stress Model and Its Application in Bluff Body Turbulent Flows

Numerical Studies of Reverse Flows Controlled by Undulating Leading Edge

Two-Dimensional Large-Eddy Simulation of Flow Past a Wind Turbine Airfoil in Deep Fall

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

An Implementation of Improved Delayed Detached Eddy Simulation Discretized with Discontinuous Galerkin Method: Application to the Vortex System Simulation of a Highly-Loaded Turbine Cascade

Detached-eddy Simulation of Flow Past a Pitching NACA 0015 Airfoil with Pulsed Actuation