Abstract:Gas turbines are important energy-converting equipment in many industries. The flow inside gas turbines is very complicated and the knowledge about the flow loss mechanism is critical to the advanced design. The current design system heavily relies on empirical formulas or Reynolds Averaged Navier–Stokes (RANS), which faces big challenges in dealing with highly unsteady complex flow and accurately predicting flow losses. Further improving the efficiency needs more insights into the loss generation in gas turbines. Conventional Unsteady Reynolds Averaged Simulation (URANS) methods have defects in modeling multi-frequency, multi-length, highly unsteady flow, especially when mixing or separation occurs, while Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES) are too costly for the high-Reynolds number flow. In this work, the Delayed Detached Eddy Simulation (DDES) method is used with a low-dissipation numerical scheme to capture the detailed flow structures of the complicated flow in a high pressure turbine guide vane. DDES accurately predicts the wake vortex behavior and produces much more details than RANS and URANS. The experimental findings of the wake vortex length characteristics, which RANS and URANS fail to predict, are successfully captured by DDES. Accurate flow simulation builds up a solid foundation for accurate losses prediction. Based on the detailed DDES results, loss analysis in terms of entropy generation rate is conducted from two aspects. The first aspect is to apportion losses by its physical resources: viscous irreversibility and heat transfer irreversibility. The viscous irreversibility is found to be much stronger than the heat transfer irreversibility in the flow. The second aspect is weighing the contributions of steady effects and unsteady effects. Losses due to unsteady effects account for a large part of total losses. Effects of unsteadiness should not be neglected in the flow physics study and design process.

Transitional Delayed Detached-Eddy Simulation for a Compressor Cascade: A Critical Assessment

Application of Delayed Detached Eddy Simulation and RANS to Compressor Cascade Flow

Detached Eddy Simulation: Recent Development and Application to Compressor Tip Leakage Flow

Performance Sensitivity Analysis and Aerodynamic Optimization of Compressor Cascades by a Turbulence Adjoint Method

Delayed-Detached-Eddy Simulation of Near-Stall Axial Compressor Flow with Varying Passage Numbers

DETACHED EDDY SIMULATION FOR THE COMPRESSOR STATOR OF HIGH-PRESSURE CASCADE WITH MASSIVE SEPARATION

Numerical Dissipation Effects on Detached Eddy Simulation of Turbomachinery Flows

Computation of Several Turbulent Flows with the Des-Sa Model

A Dynamic Delayed Detached-Eddy Simulation Model for Turbulent Flows

DDES with Adaptive Coefficient for Stalled Flows Past a Wind Turbine Airfoil

An Implementation of Improved Delayed Detached Eddy Simulation Discretized with Discontinuous Galerkin Method: Application to the Vortex System Simulation of a Highly-Loaded Turbine Cascade

Simulations of Complex Turbulent Flows with RANS-LES Hybrid Approaches

Improvements for the DDES Model with Consideration of Grid Aspect Ratio and Coherent Vortex Structures

Transitional Flow on Turbomachine Blade Using Discontinuous Galerkin Method

Machine-learning data-driven modeling of laminar-turbulent transition in compressor cascade

Analysis of unsteady flow characteristics and modal behavior of a compressor cascade using Large Eddy Simulation

Large-Eddy Simulation of Transitional Flows on a Compressor Blade

Complicated flow in tip flow field of a compressor tandem cascade using delayed detached eddy simulation

Adaptive Mesh Refinement for Ddes Simulation on Transonic Compressor Cascade with Unstructured Mesh

Local Entropy Generation in Compressible Flow Through A High Pressure Turbine with Delayed Detached Eddy Simulation

Transition-based Constrained Large-Eddy Simulation Method with Application to an Ultrahigh-Lift Low-Pressure Turbine Cascade Flow