Abstract:Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Ahead of Print. In recent years, it has been demonstrated for many two- and three-dimensional external and internal turbulent flows that the one-equation Wray-Agarwal turbulence model can compute the complex turbulent flow fields with high computational accuracy, excellent computational convergence and efficiency. In this paper, Wray-Agarwal (WA) turbulence model is employed as part of a detached eddy simulation (DES) method to predict the performance of a mixed-flow pump. By comparing the computations with the experimental results, the differences and similarities between the WA-DES model and the Shear Stress Transfer (SST) k-ω model in predicting the internal and external flow characteristics of the pump are analyzed. The results show that both the SST k-ω model and the WA-DES model can reasonably predict the performance of the pump between 0.6Q and 1.2Q, where Q is the design flow rate; however, they have their own merits and deficiencies in predicting head and efficiency of the pump at low and high flow rates. For the velocity field in the rotor-stator interaction region, the WA-DES model shows better prediction accuracy since it can accurately predict the large-scale recirculating vortex structure at the inlet of the guide vane. The SST k-ω model over-predicts the separated flow region, which leads to the emergence of a small vortex structure before the backflow region of the pump. Although the turbulent eddy viscosity predicted by the WA-DES model is higher than that of the SST k-ω model and there is small difference in the results for the scale of the tip leakage vortex (TLV) between the two models, the overall simulation results of the WA-DES model for the high turbulent viscosity region and the pressure increase in the impeller are consistent with the SST k-ω model results. The results of this paper demonstrate the potential of WA-DES model for prediction of flows in pumps.

Computation of Several Turbulent Flows with the Des-Sa Model

Les and Cdns Investigation of T106c Low Pressure Turbine

Application of Delayed Detached Eddy Simulation and RANS to Compressor Cascade Flow

Simulations of Complex Turbulent Flows with RANS-LES Hybrid Approaches

Constrained Large-Eddy Simulation and Detached Eddy Simulation of Flow Past a Commercial Aircraft at 14 Degrees Angle of Attack

DETACHED EDDY SIMULATION FOR THE COMPRESSOR STATOR OF HIGH-PRESSURE CASCADE WITH MASSIVE SEPARATION

Constrained Large Eddy Simulation of Wall-Bounded Turbulent Flows

IDDES Method Based on Differential Reynolds-stress Model and Its Application in Bluff Body Turbulent Flows

Application of a new DES model based on Wray-Agarwal turbulence model in flow simulation of a mixed-flow pump

DETACHED EDDY SIMULATION FOR THE STATOR-ROTOR INTERACTION

An Explicit Algebraic Stress-Based Delayed Detached Eddy Simulation Model for Turbulent Flows

Improvements for the DDES Model with Consideration of Grid Aspect Ratio and Coherent Vortex Structures

A Comparative Study of DES Type Methods for Mild Flow Separation Prediction on a NACA0015 Airfoil

Transitional Delayed Detached-Eddy Simulation for a Compressor Cascade: A Critical Assessment

Comparisons of Three Improved DES Methods on Unsteady Flows Past Tandem Cylinders

Detached Eddy Simulation: Recent Development and Application to Compressor Tip Leakage Flow

Reynolds-constrained Large-eddy Simulation : Sensitivity to Constraint and Subgrid-scale Models

Large-Eddy and Detached-Eddy Simulations of the Separated Flow Around a Circular Cylinder

Numerical Dissipation Effects on Detached Eddy Simulation of Turbomachinery Flows

Self-adaptive Turbulence Eddy Simulation of a Supersonic Cavity-Ramp Flow

Study of Transonic Separated Flows with zonal-DES Based on Weakly Non-linear Turbulence Model