Analysis of mixed-mode Compact-Tension-Shear (CTS) specimens with slanted propagating cracks
Pengfei Jin,Xin Wang,Haoruo Chen,Zheng Liu,Xu Chen
DOI: https://doi.org/10.1016/j.tafmec.2023.104037
IF: 4.374
2023-08-12
Theoretical and Applied Fracture Mechanics
Abstract:Compact-Tension-Shear (CTS) specimen with its loading device has been widely used in mixed-mode I&II fatigue crack growth (FCG) experiments. To accurately describe the FCG behavior of materials, it is necessary to determine both the crack length and the parameters that represent crack driving force or crack front stress field in real-time. However, the relevant solutions are currently incomplete or insufficient. In this paper, for CTS specimen with slanted propagating crack, the variations of stress field parameters including stress intensity factors (SIFs) and T -stresses, as well as crack-mouth-opening-displacement (CMOD) compliance were investigated through finite element (FE) analysis. The results show that K I , K II and T 11 are greatly influenced by the initial crack length ratio, the slanted propagating crack length ratio and the loading angle, but rarely by the specimen thickness among the considered range of geometries; T 33 as an out-of-plane constraint parameter, however, is subject to the coupling effects of in-plane geometries, out-of-plane geometries and the mixed-mode loading. Moreover, it is shown that the measurement span has an effect on CMOD-compliance results for CTS specimens under mixed-mode loading, which is only negligible within the recommended range of D / W ∈(0.02, 0.16]. Finally, the accuracy of the developed CMOD-compliance equations was validated through FCG experiments. The conclusions obtained in the current work will provide usable constraint-related crack front stress field parameter solutions for the analysis of FCG behavior in mixed fracture mode, and also give a reliable non-visual method for the determination of fatigue propagating crack length in CTS experiments.
engineering, mechanical,mechanics