Abstract:The generalized stacking fault energy (GSFE) is a material property that can provide invaluable insights into describing nanoscale plasticity phenomena in crystalline materials. Lattice strains have been suggested to influence such phenomena. Here, the GSFE curves for sequential faulting pathways in dual phase [face-centered cubic (fcc) and hexagonal close-packed (hcp)] ${\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{20}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{20}, {\mathrm{Cr}}_{25}{\mathrm{Fe}}_{25}{\mathrm{Co}}_{25}{\mathrm{Ni}}_{25}, {\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{34}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{6}, {\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{30}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{10}$, and ${\mathrm{Cr}}_{10}{\mathrm{Mn}}_{30}{\mathrm{Fe}}_{50}{\mathrm{Co}}_{10}$ high-entropy alloys are investigated on ${{111}}_{\text{fcc}}$ and ${(0002)}_{\text{hcp}}$ close-packed planes using density-functional calculations. The dependence of GSFEs on imposed volumetric and longitudinal lattice strains is studied in detail for ${\mathrm{Cr}}_{20}{\mathrm{Mn}}_{20}{\mathrm{Fe}}_{20}{\mathrm{Co}}_{20}{\mathrm{Ni}}_{20}$ and ${\mathrm{Cr}}_{10}{\mathrm{Mn}}_{30}{\mathrm{Fe}}_{50}{\mathrm{Co}}_{10}$. The competition between various plastic deformation modes is discussed for both phases based on effective energy barriers determined from the calculated GSFEs and compared with experimentally observed deformation mechanisms. The intrinsic stacking fault energy, unstable stacking fault energy, and unstable twinning fault energy are found to be closely related in how they are affected by applied strain. The ratio of two of these planar fault energies can thus serve as characteristic material property. An inverse relationship between the intrinsic stacking fault energy in the hcp phase and the axial ratio ${(c/a)}_{\text{hcp}}$ is revealed and explained via band theory.

Effect of stacking fault energy on the split length of 9R phase in coarse-grained Cu-Al alloys

Shearing Mechanisms of Stacking Fault and Anti-Phase-boundary Forming Dislocation Pairs in the Γ′ Phase in Ni-based Single Crystal Superalloy

Local Lattice Distortion Mediated Formation of Stacking Faults in Mg Alloys

Effect of twin spacing on the mechanical behavior and deformation mechanism of nanotwinned Al

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Influence of stacking fault energy on defect structures and microhardness of Cu and Cu alloys

Correlation of stacking fault energy with deformation mechanism in Cu–(2, 20)Zn alloys

Strain hardening behavior and microstructure evolution of gradient-structured Cu-Al alloys with low stack fault energy

Molecular dynamics study on the strengthening mechanisms of Cr–Fe–Co–Ni high-entropy alloys based on the generalized stacking fault energy

Effects of stacking fault energy on deformation induced grain boundary relaxation in nanograined Cu alloys

Effect of stacking fault energy on nucleation limited plasticity in Cu-Al alloys

Generalized stacking fault energies of alloys

Effect of strain on generalized stacking fault energies and plastic deformation modes in fcc-hcp polymorphic high-entropy alloys: A first-principles investigation

Effect of Short-Range Ordering on the Grain Boundary Character Distribution Optimization of FCC Metals with High Stacking Fault Energy: A Case Study on Ni-Cr Alloys

High stress twinning in a compositionally complex steel of very high stacking fault energy

Ductility Sensitivity to Stacking Fault Energy and Grain Size in Cu–Al Alloys

The Effect of Stacking Faults or Twin Formation on Crack Propagation in Bcc Iron

Doping Effects on the Stacking Fault Energies of Theγ' Phase in Ni-based Superalloys

Effect of Strain on the Intrinsic Stacking Fault Energy of Fcc Co: a First-Principles Study

Influence of stacking fault energy on twin spacing of Cu and Cu–Al alloys

Effect of stacking fault energy on deformation mechanisms in Cu and Cu-30% Zn alloy with gradient structure obtained by SMAT