Abstract:High-temperature Gas-cooled Reactor Pebble-bed Module (HTR-PM), which is designed by Tsinghua university of China, is under construction in Shidao Bay of China. It will be the world’s first pebble-bed type modular HTGR commercial demonstration plant. In HTR-PM project, steam-Rankine cycle has used in the power conversion system because it represents current state-of-the-art technology. Meanwhile, helium turbine for HTGR has been investigated for many years in Tsinghua University. Mock-up machine for HTR-10GT has been built. Helium turbine for 250MW HTGR, which is based on HTR-PM, has completed conceptual designed. However, supercritical carbon dioxide (S-CO2) Brayton cycle has shown to have great potentials for future HTGR technology in recent years because of its critical properties. Helium turbine cycle and S-CO2 Brayton cycle are both candidates for future HTGR. Therefore, comparative study is conducted in this paper. Comparison is focused on achievable efficiencies for each cycle mentioned above and on cycle layout with respect to simplicity and compactness, which primarily determines capital cost. Firstly, the physical model for helium turbine cycle with recuperator and intercooler is built and cycle performance is analyzed based on the parameters of HTR-PM. Then the model for S-CO2 Brayton cycle with recompression is also built and the cycle efficiency is analyzed with the same parameters of HTR-PM. Secondly, comparison between helium turbine cycle and S-CO2 Brayton cycle is made from the view of thermodynamics. Moreover, parameters optimization of both cycles based on HTR-PM is carried out. At last, advantage and drawback of both cycles are discussed from the engineering point. In conclusion, cycle simplicity and technology maturity of helium turbine cycle are better than S-CO2 Brayton cycle. But on the other side, smaller size equipment and less compression work of S-CO2 Brayton Cycle are more competitive than helium turbine cycle. Helium turbine with higher temperature and S-CO2 Brayton Cycle with higher pressure can achieve higher efficiency than steam Rankine cycle.

Combined Cycle Schemes Coupled with a Very High Temperature Gas-Cooled Reactor

A Study on Different Thermodynamic Cycle Schemes Coupled with a High Temperature Gas-Cooled Reactor

Performance Comparison and Optimization of Two Configurations of (very) High Temperature Gas-Cooled Reactors Combined Cycles

Thermodynamic analysis and optimization of the combined supercritical carbon dioxide Brayton cycle and organic Rankine cycle‐based nuclear hydrogen production system

Combined Cycle-Coupled High-Temperature and Very High-Temperature Gas-Cooled Reactors: Part I-Cycle Optimization

Modeling and Analyzing of Simple Combined Cycle of Modular High Temperature Gas Cooled Reactor

Study on Combined Cycle Plan of Commercial High Temperature Gas cooled Reactor

Combined cycles-coupled high-temperature and very high-temperature gas-cooled reactors: Part II - Engineering design

Study on compound combined cycle of high temperature gas cooled reactor

Preliminary Design and Analysis of a Very-High-Temperature Reactor-Driven Hydrogen-Electricity Cogeneration System

Benefits, Drawbacks, and Future Trends of Brayton Helium Gas Turbine Cycles for Gas-Cooled Fast Reactor and Very-High Temperature Reactor Generation IV Nuclear Power Plants

Characteristics Analysis of Combined Cycle Coupled with High Temperature Gas-Cooled Reactor Based on Progressive Optimization

Study of Two Innovative Hydrogen and Electricity Co-Production Systems Based on Very-High-temperature Gas-Cooled Reactors

Study on Characteristics of Simplified Combined Cycle of High Temperature Gas-cooled Reactor

Coupled Characteristics and Performance of Heat Pipe Cooled Reactor with Closed Brayton Cycle

Coupling of Modular High-Temperature Gas-Cooled Reactor with Supercritical Rankine Cycle

Comparative Study of Helium Turbine Brayton Cycle and Supercritical CO2 Brayton Cycle for HTGR

Thermo-economic and Environmental Analyses of Supercritical Carbon Dioxide Brayton Cycle for High Temperature Gas-Cooled Reactor

Design and application of the HTR-100 industrial nuclear power plant

Comparison of Plant Efficiencies of Various Power Conversion Systems for High-Temperature Reactor Modules

Feasibility Study of Scheme and Regenerator Parameters for Trinary Power Cycles