Abstract:Heat pipe cooled reactors are solid-state, high temperature reactors with significant thermal expansion which influences the neutronics and thermal analyses. The heat pipe operating conditions determine the heat transfer rates and temperature distribution which then affect the core neutronic and thermal-mechanical behavior, especially during heat pipe failure accidents where the radial heat flux is uneven. A two-phase two-dimensional heat pipe model was developed and coupled to a previous neutronic and thermal-mechanical (N/T-M) model. The coupled neutronic, thermal-mechanical and heat pipe heat transfer (N/T-M/HP) strategy is described here with a focus on the iteration schemes, physical mapping and geometry reconstruction. The coupled N/T-M/HP method was then applied to the KRUSTY heat pipe cooled reactor, an experimental solid-state reactor designed to power space missions. The power distribution and reactivity predicted by the coupled method are validated against previous simulations for the KRUSTY design. The heat pipe model predictions are compared with heat pipe experiments which show that the predicted heat pipe wall temperature is within 30 K of the measured temperatures. A steady-state normal operating case and a single heat pipe failure accident were then simulated to show the redundancy and reliability of the solid-state reactor. For the normal case, the thermal-mechanical feedback is similar to 850 pcm from the cold state to the hot state. The heat transfer rate into each heat pipe is very stable during the iterations. For the single heat pipe failure accident, the heat pipes adjacent to the failure area are the most affected, with those heat loads increasing from 500 W to 640 W and an operating temperature rising by 16 K. In addition, the single heat pipe failure accident significantly increases the stress concentration in the fuel contacted with the failed heat pipe wall, with the peak stress increasing from 53 MPa to 80 MPa, which is very close to the yield stress. Therefore, the mechanical performance of the solid-state reactor should be carefully analyzed during design and operation.

Coupled Characteristics and Performance of Heat Pipe Cooled Reactor with Closed Brayton Cycle

Experimental and Numerical Study on Thermal Hydraulic Performance of Trapezoidal Printed Circuit Heat Exchanger for Supercritical CO2 Brayton Cycle

Thermal‐hydraulic analysis of gas‐cooled space nuclear reactor power system with closed Brayton cycle

Temperature Fluctuation Mitigation of Heat Pipe Cooled Reactor with Closed Brayton Cycle During Load-Following Dynamic Power Regulation

Dynamic Modeling of a HeXe-Cooled Mobile Nuclear Reactor with Closed Brayton Cycle

The investigation of thermo-economic performance for dry-cooled closed Brayton cycle coupled to nuclear microreactors using different coolants

Neutronic and Thermal-Mechanical Coupling Schemes for Heat Pipe Cooled Reactor Designs

Dynamic simulation of a space lithium-cooled reactor system coupled with a He–Xe closed Brayton cycle

Dynamic simulation of a space gas-cooled reactor power system with a closed Brayton cycle

Evaluation of start-up characteristics for heat pipe-cooled nuclear reactor coupled with recuperated open-air brayton cycle using hardware-in-the-loop

Combined Cycle Schemes Coupled with a Very High Temperature Gas-Cooled Reactor

Dynamic Characteristics Analysis for a Novel Double-Rotor He-Xe Closed-Brayton-Cycle Space Nuclear Power Generation System

Multi-physics coupling analysis on neutronics, thermal hydraulic and mechanics characteristics of a nuclear thermal propulsion reactor

Rmc/ansys multi-physics coupling solutions for heat pipe cooled reactors analyses

A new neutronics-thermal-mechanics multi-physics coupling method for heat pipe cooled reactor based on RMC and OpenFOAM

A transient multiphysics coupling method based on OpenFOAM for heat pipe cooled reactors

Coupled neutronic, thermal-mechanical and heat pipe analysis of a heat pipe cooled reactor

Investigations of Multiphysics Models on a Megawatt-Level Heat Pipe Nuclear Reactor Based on High-Fidelity Approaches

Applications of Brayton cycle technology to space power

Multi-physics coupling analysis of test heat pipe reactor KRUSTY based on MOOSE framework

Thermodynamic analysis and optimization of the combined supercritical carbon dioxide Brayton cycle and organic Rankine cycle‐based nuclear hydrogen production system