Abstract:High temperature gas-cooled reactor with direct helium turbine cycle is based on the closed Brayton cycle. Its outstanding feature is the high efficiency of power generation. Pervious researches showed that recuperator was the key component to promote the cycle’s efficiency. And pressure drops in components were unavoidable in actual projects and had significant influence on cycle efficiency. A dimensionless model was proposed to analyze cycle’s features of HTGR coupled with gas turbine. The parameters’ effect on cycle’s efficiency was analyzed, with full consideration of the frictional and local pressure drops respectively. Under the restriction of materials and state-of-art of technologies, it showed that the cycle’s efficiency depended on compression ratio, recuperator’s effectiveness and pressure drops of components. However the pressure drop ratios of different components were inherently connected due to the closed cycle. Furthermore pressure drops inside the recuperator were also the function of effectiveness of the heat transfer based on the Reynolds analogy. Therefore cycle’s efficiency just depended on recuperator’s effectiveness with fixed compression ratio. So there existed optimal recuperator’s effectiveness and maximum cycle’s efficiency, which varied with the pressure ratio and other parameters as temperature ratio. The calculation also indicated that the pressure drop in pipes was close to that in heat exchangers. That was, the local pressure drop and frictional pressure drop should be considered respectively, and the local pressure drop made quite large reduction of cycle’s efficiency. The result also showed that local pressure drop had great influence on parameters such as optimal compression ratio and recuperator’s effectiveness.

Modeling and Analyzing of Simple Combined Cycle of Modular High Temperature Gas Cooled Reactor

A Study on Different Thermodynamic Cycle Schemes Coupled with a High Temperature Gas-Cooled Reactor

Characteristics Analysis of Combined Cycle Coupled with High Temperature Gas-Cooled Reactor Based on Progressive Optimization

Combined Cycle-Coupled High-Temperature and Very High-Temperature Gas-Cooled Reactors: Part I-Cycle Optimization

Off-design Performance and Power-Control Strategy for Combined Cycle Coupled with High-Temperature Gas-Cooled Reactor

Model-Based Load Following Control for Helical-Coiled Supercritical Steam Generator of MHTGR

Dimensionless Analysis of Pressure Drop and Heat Transfer on HTGR Coupled with Closed Brayton Cycle

The Parameter Analysis on the Gas Turbine Cycle in a High Temperature Gas-Cooled Reactor

Parametric studies on different gas turbine cycles for a high temperature gas-cooled reactor

Combined Cycle Schemes Coupled with a Very High Temperature Gas-Cooled Reactor

Optimal Design of Supercritical CO2 Power Cycle for High Temperature Gas-Cooled Reactor

Exergy analysis of HTGR-GT

Modeling and Control Scheme Design of a Multi-Modular High Temperature Gas Cooled Reactor Cogeneration Unit

Combined cycles-coupled high-temperature and very high-temperature gas-cooled reactors: Part II - Engineering design

Thermodynamic Analysis and Optimization of Helium Turbine Cycle of Commercial High Temperature Gas-Cooled Reactor

Primary study of steady states of HTGR-GT

Performance Comparison and Optimization of Two Configurations of (very) High Temperature Gas-Cooled Reactors Combined Cycles

Icone23-1057 parametric studies on thermal cycle of htgr with he-co_2 mixed working medium

Thermo-economic and Environmental Analyses of Supercritical Carbon Dioxide Brayton Cycle for High Temperature Gas-Cooled Reactor

Study on compound combined cycle of high temperature gas cooled reactor

Study on Combined Cycle Plan of Commercial High Temperature Gas cooled Reactor