Abstract:Ultra-short pulse laser interaction with diamond materials has attracted extensive interest in micro- and nano-machining, especially for the fabrication of micro tools, because of the straightforward method and high precision. Thanks to the development of chemical vapor deposition (CVD) technology, high-quality CVD diamonds are employed in more varieties of tools as performance-enhancing coatings. The purpose of the experiments reported here was to explore the machinability of CVD diamond coating under the irradiation of femtosecond (fs) pulsed laser. The factor-control approach was adopted to investigate the influence of scanning speed, single pulse energy and repetition rate on the surface quality and carbon phase transition of CVD diamond coating. The material removal rate and surface roughness were evaluated. The interaction mechanism of scanning speed, single pulse energy, and repetition rate were discussed, and the fs laser ablation threshold of CVD diamond coating was calculated. It was demonstrated that two ablation mechanisms (weak and intensive) were in existence as evidenced by the distinct surface morphologies induced under different processing conditions. A strong dependence on the variation of scanning speed and pulse energy is identified in the examination of surface roughness and removal rate. Lorentzian–Gaussian deconvolution of Raman spectra illustrates that fs laser irradiation yields a strong modification effect on the coating and release the compressive stress in it. Furthermore, a newly defined parameter referring to the fs laser energies applied to unit volume was introduced to depict the degree of ablation and the Taguchi method was used to figure out the significance of different parameters. The ablation threshold of CVD diamond coating at the effective pulses of 90 is calculated to be 0.138 J/cm2.

The Influence of the Ionization Regime on Femtosecond Laser Beam Machining Mono-Crystalline Diamond

The Influence of the Focus Position on Laser Machining and Laser Micro-Structuring Monocrystalline Diamond Surface

Study on Femtosecond Laser Processing Characteristics of Nano-Crystalline CVD Diamond Coating

Microstructure and Chemical Bond Evolution of Diamond-Like Carbon Films Machined by Femtosecond Laser

Laser Machining Micro-Structures on Diamond Surface with a Sub-Nanosecond Pulsed Laser

Effects of pulsed laser processing on structural evolution of diamonds - A molecular dynamics and experimental study

Analysis of the machining performance and surface integrity in laser milling of polycrystalline diamonds

Research on the mechanism of micromachining of CVD diamond by femtosecond laser

Cryogenic assisted femtosecond laser ablation of polycrystalline diamond

Precision Machining of Single Crystal Diamond Cutting Tool Via Picosecond Laser Irradiation

Ablation Threshold Measurement and Chemical Modification of UV Nanosecond Laser Micromachining of Polycrystalline Diamond

Ablation mechanism investigation and ablation threshold prediction of single crystal diamond irradiated by femtosecond laser

Temperature evolution and material removal mechanisms in nanosecond-pulsed laser ablation of polycrystalline diamond

Raman Study of the Diamond to Graphite Transition Induced by the Single Femtosecond Laser Pulse on the (111) Face

Experiment on Ablation Threshold of Single Crystal Diamond Produced by Femtosecond Laser Processing

Optimization of the Femtosecond Laser Machining Process for Single Crystal Diamond Using Response Surface Methodology

Understanding femtosecond laser internal scribing of diamond by atomic simulation: Phase transition, structure and property

Processing of diamond applying femtosecond and nanosecond laser pulses

Nanosecond pulsed laser-processing of CVD diamond

Modeling of the temperature field in nanosecond pulsed laser ablation of single crystalline diamond

Growth of highly oriented graphite by ultraviolet nanosecond pulsed laser ablation of monocrystalline diamond