Abstract:A systematic study was conducted to analyze the grain boundary microstructure evolution of GH4169 nickel-based superalloy during the micro-strain stage of thermal deformation. A quasi-in-situ EBSD (electron backscatter diffraction) approach was used for observation. Moreover, at a temperature of 1100 degrees C and a strain rate of 0.1 s(-1), a continuous strain uniaxial compression experiment was carried out. We observed the development of the grain boundary structure and the grain boundary deformation. The experimental findings revealed that GH4169 underwent locally inhomogeneous thermal deformation during the micro-strain stage, and the simultaneous occurrences of grain boundary slip, grain rota-tion, and grain boundary migration, exhibiting microstructural diversity. The grain boundary structure changed continuously as a result of the random movement of high -angle grain boundaries. Twin grains displayed a stable structure during the migration of grain boundaries, and their content indicated a considerable decrease as the strain increased. This provides a basis for directing the design of grain boundary engineering since it suggests that twin boundaries are easier to migrate during thermal deformation. In addition, no evidence of dynamic recrystallization was found throughout the entire micro -strain stage and a <101>/<111> micro-texture was observed, which is compatible with common dislocation slips in face-centered cubic crystals. Then, on the basis of the transmission electron microscope images of the microstructure, the numerous forms of grain boundary deformation were rationally explained from the standpoint of the relation mechanisms among grain boundaries and dislocations. Finally, the synergistic mechanism of grain boundary slip and migration is established as the primary mechanism of thermal deformation in the micro-strain stage.(c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Effects of Low- to Medium-Angle Grain Boundaries on Creep Properties of Superalloy

Effects of Microstructure and Lattice Misfit on Creep Life of Ni-based Single Crystal Superalloy During Long-Term Thermal Exposure

Creep Properties and Life Model of Anisotropic Ni-based Single Crystal Superalloys over a Wide Temperature Range

Creep Behavior and Life Assessment of Anisotropic Bicrystals with A Void and Without Void in Different Kinds of Grain Boundaries

Anisotropic Creep Life Prediction of Nickel-based Single Crystal Based on Dislocation Movement

Analysis and Prediction of Non-Isothermal Creep Behavior in Ni-based Single Crystal Superalloy

Based on Damage Caused by Microstructure Evolution During Long-Term Thermal Exposure to Analyze and Predict Creep Behavior of Ni-based Single Crystal Superalloy

Creep Residual Life Prediction of a Nickel-Based Single Crystal Superalloy Based on Microstructure Evolution

Creep-fatigue Behavior of Nickel-Based Single Crystal Superalloy with Different Orientations: Experimental Characterization and Multi-Scale Simulation

The Influence of Grain Boundary Angle on the Hot Cracking of Single Crystal Superalloy DD6

Creep Behavior and Deformation Mechanism of a Third-Generation Single Crystal Ni-Based Superalloy at 980 °C

Evaluation of Creep Damage Behavior of Nickel-Base Directionally Solidified Superalloys with Different Crystallographic Orientations

Creep damage and crack initiation behaviour of nickel-base single crystalline superalloys compact tension specimen with a void ahead of crack tip

Properties and Simulation of Nonisothermal Creep of a Directionally Solidified Superalloy

Effect of initial γ/γ′ microstructure on creep of single crystal nickel-based superalloys: A phase-field simulation incorporating dislocation dynamics

Damage Tolerance of Low Angle Grain Boundary in a Fourth Generation Nickel-based Single Crystal Superalloy at 1100 °C Service Conditions

Inhibitory Effect of Low-Angle Grain Boundaries on the Creep Behavior of Gradient Nano-Grained Cu: A Molecular Dynamics Study

Quasi-in-situ Observation and Analysis of Grain Boundary Evolution of GH4169 Nickel-Based Superalloy During the Micro-Strain Stage of Thermal Deformation

Quasi-in-Situ Observation and Analysis of Grain Boundary Evolution of Gh4169 Nickel-Based Superalloy During Micro-Strain Stage of Thermal Deformation

Impacts of different designed microstructures on creep performance of a Ni-based wrought superalloy

Numerical Investigation of Grain Boundary Effects on Elevated-Temperature Deformation and Fracture