Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Compact Planar Balanced Crossover with Bandpass Response

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Dual-band bandpass filter using centrally coupled resonators (CCRs)

A Compact Wideband Microstrip Crossover

Compact dual-band balanced bandpass filter using CRLH resonator with intrinsic common-mode suppression and multiple transmission zeros

Design of Wide-Stopband and Dual-Band Filtering Crossovers Based on Mixed Substrate Integrated Waveguide Cavities

A Compact Meander Line-Resonator Hybrid Structure for Wideband Common-Mode Suppression

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

Compact Dual-band Bandpass Filter Using Coupled Lines Multimode Resonator

Planar Compact Dual-Band Balun with Flexible Frequency Ratios

High Selective Balanced Bandpass Filters Using End-Connected Conductor-Backed Coplanar Waveguide.

Compact dual‐band balanced bandpass filter with controllable passbands using coplanar waveguide spiral cross resonators

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Synthesis Design of High Selectivity Wideband Balanced Bandpass Filter Based on Parallel Coupled Lines

High common‐mode rejection balanced bandpass filter using novel coupling scheme and source‐loaded coupling technique

Compact Fully‐canonical Dual‐band Bandpass Filter with Independently Controllable Bandwidths

Design of compact balanced filters with wide DM upper stopband and CM rejection band based on semi‐circular patch