Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

High Selective Balanced Bandpass Filters Using End-Connected Conductor-Backed Coplanar Waveguide.

Conductor-Backed CPW Bandpass Filters With Electromagnetic Couplings

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

Coplanar Waveguide Bandpass Filters with Separated Electric and Magnetic Couplings

Design of compact balanced filters with wide DM upper stopband and CM rejection band based on semi‐circular patch

High common‐mode rejection balanced bandpass filter using novel coupling scheme and source‐loaded coupling technique

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

High selectivity and common-mode suppression balanced bandpass filter with TM dual-mode SIW cavity

Compact Tunable Balanced Bandpass Filter with Constant Bandwidth Based on Magnetically Coupled Resonators

Miniaturized Circular Substrate Integrated Waveguide Bandpass Filter With Flexible Mixed Coupling and Wide Stopband Rejection

Compact dual-band balanced bandpass filter using CRLH resonator with intrinsic common-mode suppression and multiple transmission zeros

Compact Microstrip Balanced Bandpass Filter with Adjustable Transmission Zeros

Notice of Retraction: A Novel Coplanar Common-Mode Filter with a Wide Stopband

Compact Coplanar Waveguide Low-Pass Filter Using a Novel Electromagnetic Bandgap Structure

Synthesis Design of High Selectivity Wideband Balanced Bandpass Filter Based on Parallel Coupled Lines

Characterizing and Modeling Conductor-backed CPW Periodic Band Stop Filter with Miniaturized Size

High Selectivity and CM Suppression Frequency-Dependent Coupling Balanced BPF

SECOND-ORDER MIXED COUPLING FILTER WITH ONE CONTROLLABLE TRANSMISSION ZERO USING MULTILAYER SUBSTRATE INTEGRATED WAVEGUIDE