Abstract:Nanofiltration (NF) with high water flux and precise separation performance with high Li+/Mg2+ selectivity is ideal for lithium brine recovery. However, conventional polyamide-based commercial NF membranes are ineffective in lithium recovery processes due to their undesired Li+/Mg2+ selectivity. In addition, they are constrained by the water permeance selectivity trade-off, which means that a highly permeable membrane often has lower selectivity. In this study, we developed a novel nonpolyamide NF membrane based on metal-coordinated structure, which exhibits simultaneously improved water permeance and Li+/Mg2+ selectivity. Specifically, the optimized Cu–m-phenylenediamine (MPD) membrane demonstrated a high water permeance of 16.2 ± 2.7 LMH/bar and a high Li+/Mg2+ selectivity of 8.0 ± 1.0, which surpassed the trade-off of permeance selectivity. Meanwhile, the existence of copper in the Cu–MPD membrane further enhanced anti-biofouling property and the metal-coordinated nanofiltration membrane possesses a pH-responsive property. Finally, a transport model based on the Nernst–Planck equations has been developed to fit the water flux and rejection of uncharged solutes to the experiments conducted. The model had a deviation below 2% for all experiments performed and suggested an average pore radius of 1.25 nm with a porosity of 21% for the Cu–MPD membrane. Overall, our study provides an exciting approach for fabricating a nonpolyamide high-performance nanofiltration membrane in the context of lithium recovery.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02252?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02252</a>.SEM images and photos of prepared membranes; ζ-potential of Cu–MPD NF membrane and PES substrate; AFM images of prepared membranes; XPS spectra and ζ-potential of prepared membranes; copper loading in the prepared membrane with different Cu/MPD ratios; UV–vis spectra and thickness of Cu–MPD oligomers with different Cu/MPD ratios; separation performance of membrane with different components; membrane anti-biofouling ability test by rotating disk; membrane anti-biofouling ability test by cross-flow filtration; copper leaching test in pure water; comparison of membrane filtration performance in this work to the literature; membrane long-term running stability test; feed, retentate, and permeate concentration in 12 h filtration; recipe for fabricating the Cu–MPD membrane; contact angle and isoelectrical point of prepared membranes; comparison of this work to the literature; Cu loading concentration in different types of membranes; average biofilm thickness and average biovolume on the surface of prepared membranes; I and Cu concentrations before and after 5 h reaction; performance of membrane with different recipes; and recipe of the membranes in Table S7 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02252/suppl_file/am1c02252_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Fabrication of Lithium Ion Imprinted Hybrid Membranes with Antifouling Performance for Selective Recovery of Lithium

Multilayered Ion-Imprinted Membranes with High Selectivity Towards Li+ Based on the Synergistic Effect of 12-Crown-4 and Polyether Sulfone

Extraction of lithium ions from acidic solution using electrochemically imprinted membrane

Fabrication of Highly Selective Ion Imprinted Macroporous Membranes with Crown Ether for Targeted Separation of Lithium Ion

Facile Synthesis of Degradable CA/CS Imprinted Membrane by Hydrolysis Polymerization for Effective Separation and Recovery of Li+

Ion-imprinted antifouling nanocomposite membrane for separation of lithium ion

Synthesis of Ion Imprinted Nanocomposite Membranes for Selective Adsorption of Lithium

Recovery of Lithium from Wastewater Using Development of Li Ion-Imprinted Polymers

Electrospun nanofiber membrane of dibenzo 14-crown-4-ether polyimide for efficient selective lithium recovery from discarded lithium-ion batteries

Preparation of Halloysite/polyvinylidene Fluoride Composite Membrane by Phase Inversion Method for Lithium Ion Battery

Ion-imprinted membranes for lithium recovery: A review

A lithium ion-imprinted adsorbent using magnetic carbon nanospheres as a support for the selective recovery of lithium ions

Tailorable metal–organic framework based thin film nanocomposite membrane for lithium recovery from wasted batteries

Novel Positively Charged Metal-Coordinated Nanofiltration Membrane for Lithium Recovery

Nitrogen-doped substrate material ion imprinting–capacitive deionization selective recovery of lithium ions from acidic solutions

Crown Ether Grafted Graphene Oxide/Chitosan/Polyvinyl Alcohol Nanofiber Membrane for Highly Selective Adsorption and Separation of Lithium Ion

Efficient Lithium Recovery from Water Using Polyamide Thin-Film Nanocomposite (TFN) Membrane Modified with Positively Charged Silica Nanoparticles

Synthesis of Cauliflower-Like Ion Imprinted Polymers for Selective Adsorption and Separation of Lithium Ion

A novel lithium ion-imprinted membrane with robust adsorption capacity and anti-fouling property based on the uniform multilayered interlayer

Adsorption performance and mechanism of TiO 2 /PVDF-based lithium-ion imprinted membrane in leaching solution of spent lithium-ion batteries

High-performance ionic liquid-based membranes employed for efficient recovery of lithium