Abstract:Steady-state numerical modeling is mostly used for predicting the flow and transport characteristics in an ejector, but it may not be able to reflect the actual performances of an ejector when operating condition varies. Moreover effects of needle movement on the performances of an ejector is not very clear. In this study, a transient heterogeneous mixture model was developed for a two-phase CO 2 needle adjustable ejector with motive nozzle inlet in supercritical, critical or sub-critical regions. The dynamic mesh method was used to control the needle movement, and the unsteady coupling solution between the needle movement and the flow field is solved for the adjustable two-phase CO 2 ejector. Modeling results show that the transient modeling can predict dynamic performances of CO 2 ejector more accurately than the steady-state modeling. Based on the transient modeling, it is found that as the needle moves further into the motive nozzle throat, effective nozzle throat area decreases, expansion angle of motive flow increases then decreases, the velocity at the motive nozzle outlet decreases then increases, and entrainment ratio decreases, then increases sharply, then decreases, finally become negative. High pressure at the motive nozzle inlet leads to high entrainment ratio owning to high velocity at the motive nozzle throat outlet. A sudden increase of pressure at the motive nozzle inlet in different thermodynamic state regions (supercritical, sub-critical) leads to different dynamic performance responses and oscillation times of ejector. The mechanisms of boundary layer separation and backflow vortices as well as shock waves were explored to explain the suction flow chocking phenomena. This study is helpful to understand flow mechanisms inside the CO 2 ejector, and improve optimal design and control of an adjustable two-phase CO 2 ejector in variable operating conditions in practice.

Theoretical model of transcritical CO 2 ejector with non-equilibrium phase change correlation

A Comparative Study on Regulation Methods for Transcritical CO2 Ejector Expansion Refrigeration System.

Thermodynamic Analysis on a Two-Stage Transcritical CO2 Heat Pump Cycle with Double Ejectors

Ejector Used in Transcritical CO_2 Heat Pump System

EXPERIMENTAL STUDY ON TWO TYPES OF TRANSCRITICAL CO2 HEAT PUMP WATER HEATER SYSTEM

Experimental and Numerical Investigation on the Dynamic Characteristics of a Lab-Scale Transcritical CO2 Loop

Effect of Mixing Chamber Diameter on Performance of Transcritical CO2 Heat Pump System with Ejector

Dynamic Simulation on Operating Modes of Ejector in Transcritical Co2 Ejector Expansion Refrigeration Cycles

Theoretical Analysis of a Transcritical CO_2 Vapor Compression/ejection Refrigeration Cycle

Transient numerical study of CO 2 two-phase flow in a needle adjustable ejector

Advanced Exergy Analyses of an Ejector Expansion Transcritical Co2 Refrigeration System

A physics-based hybrid model for supercritical CO2 ejector in critical flow regime

Dynamic Model of a Transcritical CO2 Ejector Expansion Refrigeration System

Particular characteristics of transcritical CO2 refrigeration cycle with an ejector

Theoretical Analysis on a Novel Two-Stage Compression Transcritical CO2 Dual-Evaporator Refrigeration Cycle with an Ejector

An experimental and theoretical study of a CO2 ejector

Thermodynamic analysis of a novel multi-target temperature transcritical CO2 ejector-expansion refrigeration cycle with vapor-injection

Flow Visualization of Supersonic Two-Phase Transcritical Flow of CO2 in an Ejector of a Refrigeration System

Numerical Investigation of a Two-Phase Ejector Operation Taking into Account Steam Condensation with the Presence of CO2

Effect of non-equilibrium phase transition on the aero-thermodynamic performance of supercritical carbon dioxide compressors

Development of Control Model for Critical Operation Ejector